Audi P0455 Fault Code: Missing fuel cap, Defective or damaged fuel cap, Distorted or damaged Fuel Tank Filler Neck, Torn or punctured Evaporative system hose(s), Defective Fuel Tank Sending Unit gasket or seal, Split or damaged Carbon Canister, Defective Evaporative Vent Valve and or Evaporative Purge Valve, Defective or damaged fuel tank, Defective Fuel Tank Pressure Sensor
Audi P0455 (EVAP Emissions Control): Missing fuel cap, Defective or damaged fuel cap, Distorted or damaged Fuel Tank Filler Neck, Torn or punctured Evaporative system hose(s), Defective Fuel Tank Sending Unit gasket or seal, Split or damaged Carbon Canister, Defective Evaporative Vent Valve and or Evaporative Purge Valve, Defective or damaged fuel tank, Defective Fuel Tank Pressure Sensor.
Audi fault code P0455 indicates Missing fuel cap, Defective or damaged fuel cap, Distorted or damaged Fuel Tank Filler Neck, Torn or punctured Evaporative system hose(s), Defective Fuel Tank Sending Unit gasket or seal, Split or damaged Carbon Canister, Defective Evaporative Vent Valve and or Evaporative Purge Valve, Defective or damaged fuel tank, Defective Fuel Tank Pressure Sensor. Usually safe for short trips if no severe drivability or safety warnings are active. Typical professional repair costs $43–$346.
- Safe to Operate?
- Yes (Short Term)
- DIY Difficulty
- Easy (Basic Tools)
- System
- EVAP Emissions Control
- Professional Repair
- $43 – $346
What This Fault Code Means
Manufacturer-specific Audi diagnostic trouble code P0455: Missing fuel cap, Defective or damaged fuel cap, Distorted or damaged Fuel Tank Filler Neck, Torn or punctured Evaporative system hose(s), Defective Fuel Tank Sending Unit gasket or seal, Split or damaged Carbon Canister, Defective Evaporative Vent Valve and or Evaporative Purge Valve, Defective or damaged fuel tank, Defective Fuel Tank Pressure Sensor.
Common Symptoms
- Warning indicator or active diagnostic code P0455
- Irregular behavior in EVAP Emissions Control
Most Likely Root Causes
- Faulty sensor or actuator in EVAP Emissions Control
- Damaged, corroded, or loose wiring harness connector
Diagnostic Checks Before Replacing Parts
Verify the exact faulty component before ordering replacements.
- 1Read stored freeze-frame data and companion codes alongside P0455.
- 2Inspect electrical connectors, fuses, and harnesses connected to EVAP Emissions Control.
- 3Verify live sensor telemetry before ordering replacement components.
Interactive Symptom Triage
Answer 3 quick checks to narrow down the faulty component before spending money on parts.
Are any companion fault codes stored alongside P0455?
Step-by-Step Troubleshooting & Fix
- 1Scan for companion fault codes and address upstream circuit issues first.
- 2Visually inspect wiring harnesses, plugs, and hoses around EVAP Emissions Control.
- 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
- 4Repair damaged wiring or install an OEM-grade replacement EVAP Emissions Control.
- 5Clear fault memory and run a verification cycle to confirm P0455 does not return.
Estimated Repair Cost Benchmark
Typical DIY parts and certified technician labor ranges. Select a currency below.
| Repair Path | USD |
|---|---|
| DIY Parts Only | $16 – $145 |
| Professional Repair (Parts + Labor) | $43 – $346 |
Frequently Asked Questions
Is it safe to keep operating with fault code P0455?
Usually safe for short trips if no severe drivability or safety warnings are active.
How much does it cost to repair P0455?
DIY replacement parts average $16–$145, while professional service averages $43–$346.
Will resetting P0455 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.
Related Searches & Questions
Manufacturer & Technical Reference
Audi Technical Reference (EVAP Emissions Control)