# Audi P0455: Missing fuel cap, Defective or damaged fuel cap, Distorted or damaged Fuel Tank Filler Neck, Torn or punctured Evaporative system hose(s), Defective Fuel Tank Sending Unit gasket or seal, Split or damaged Carbon Canister, Defective Evaporative Vent Valve and or Evaporative Purge Valve, Defective or damaged fuel tank, Defective Fuel Tank Pressure Sensor

> **Quick Answer:** Audi fault code P0455 indicates Missing fuel cap, Defective or damaged fuel cap, Distorted or damaged Fuel Tank Filler Neck, Torn or punctured Evaporative system hose(s), Defective Fuel Tank Sending Unit gasket or seal, Split or damaged Carbon Canister, Defective Evaporative Vent Valve and or Evaporative Purge Valve, Defective or damaged fuel tank, Defective Fuel Tank Pressure Sensor. Usually safe for short trips if no severe drivability or safety warnings are active. Typical professional repair costs $43–$346.

- **URL:** https://faultcodes.org/automotive/audi-p0455
- **Category:** Automotive & OBD-II
- **Brand / Standard:** Audi
- **System Area:** EVAP Emissions Control
- **Severity:** Low — Minor Issue
- **Safe to Operate?:** Yes (Short Term)
- **DIY Difficulty:** Easy (Basic Tools)
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
Manufacturer-specific Audi diagnostic trouble code P0455: Missing fuel cap, Defective or damaged fuel cap, Distorted or damaged Fuel Tank Filler Neck, Torn or punctured Evaporative system hose(s), Defective Fuel Tank Sending Unit gasket or seal, Split or damaged Carbon Canister, Defective Evaporative Vent Valve and or Evaporative Purge Valve, Defective or damaged fuel tank, Defective Fuel Tank Pressure Sensor.

## Common Symptoms
- Warning indicator or active diagnostic code P0455
- Irregular behavior in EVAP Emissions Control

## Most Likely Root Causes
- Faulty sensor or actuator in EVAP Emissions Control
- Damaged, corroded, or loose wiring harness connector

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around EVAP Emissions Control.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement EVAP Emissions Control.
5. Clear fault memory and run a verification cycle to confirm P0455 does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $16–$145 | $43–$346 |
| GBP | £13–£114 | £34–£275 |
| CAD | CA$22–CA$194 | CA$58–CA$464 |
| EUR | €15–€134 | €40–€320 |
| CHF | CHF 17–CHF 154 | CHF 53–CHF 422 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code P0455?
Usually safe for short trips if no severe drivability or safety warnings are active.

### How much does it cost to repair P0455?
DIY replacement parts average $16–$145, while professional service averages $43–$346.

### Will resetting P0455 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

