Audi P0135 Fault Code: Defective Oxygen Sensor/Air Fuel Ratio Sensor, defective Oxygen Sensor/Air Fuel Ratio Sensor Heater Circuit, Exhaust System Leak, Intake Air System leak, Low Fuel Pressure, Defective Engine Coolant Temperature Sensor, Defective sensor wiring and or circuit problem, PCM software needs to be updated, Defective PCM
Audi P0135 (Fuel Trim & Air/O2 Metering): Defective Oxygen Sensor/Air Fuel Ratio Sensor, defective Oxygen Sensor/Air Fuel Ratio Sensor Heater Circuit, Exhaust System Leak, Intake Air System leak, Low Fuel Pressure, Defective Engine Coolant Temperature Sensor, Defective sensor wiring and or circuit problem, PCM software needs to be updated, Defective PCM.
Audi fault code P0135 indicates Defective Oxygen Sensor/Air Fuel Ratio Sensor, defective Oxygen Sensor/Air Fuel Ratio Sensor Heater Circuit, Exhaust System Leak, Intake Air System leak, Low Fuel Pressure, Defective Engine Coolant Temperature Sensor, Defective sensor wiring and or circuit problem, PCM software needs to be updated, Defective PCM. Usually safe for short trips if no severe drivability or safety warnings are active. Typical professional repair costs $130–$518.
- Safe to Operate?
- Yes (Short Term)
- DIY Difficulty
- Moderate (Intermediate)
- System
- Fuel Trim & Air/O2 Metering
- Professional Repair
- $130 – $518
What This Fault Code Means
Manufacturer-specific Audi diagnostic trouble code P0135: Defective Oxygen Sensor/Air Fuel Ratio Sensor, defective Oxygen Sensor/Air Fuel Ratio Sensor Heater Circuit, Exhaust System Leak, Intake Air System leak, Low Fuel Pressure, Defective Engine Coolant Temperature Sensor, Defective sensor wiring and or circuit problem, PCM software needs to be updated, Defective PCM.
Common Symptoms
- Warning indicator or active diagnostic code P0135
- Irregular behavior in Fuel Trim & Air/O2 Metering
Most Likely Root Causes
- Faulty sensor or actuator in Fuel Trim & Air/O2 Metering
- Damaged, corroded, or loose wiring harness connector
Diagnostic Checks Before Replacing Parts
Verify the exact faulty component before ordering replacements.
- 1Read stored freeze-frame data and companion codes alongside P0135.
- 2Inspect electrical connectors, fuses, and harnesses connected to Fuel Trim & Air/O2 Metering.
- 3Verify live sensor telemetry before ordering replacement components.
Interactive Symptom Triage
Answer 3 quick checks to narrow down the faulty component before spending money on parts.
Are any companion fault codes stored alongside P0135?
Step-by-Step Troubleshooting & Fix
- 1Scan for companion fault codes and address upstream circuit issues first.
- 2Visually inspect wiring harnesses, plugs, and hoses around Fuel Trim & Air/O2 Metering.
- 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
- 4Repair damaged wiring or install an OEM-grade replacement Fuel Trim & Air/O2 Metering.
- 5Clear fault memory and run a verification cycle to confirm P0135 does not return.
Estimated Repair Cost Benchmark
Typical DIY parts and certified technician labor ranges. Select a currency below.
| Repair Path | USD |
|---|---|
| DIY Parts Only | $45 – $218 |
| Professional Repair (Parts + Labor) | $130 – $518 |
Frequently Asked Questions
Is it safe to keep operating with fault code P0135?
Usually safe for short trips if no severe drivability or safety warnings are active.
How much does it cost to repair P0135?
DIY replacement parts average $45–$218, while professional service averages $130–$518.
Will resetting P0135 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.
Related Searches & Questions
Manufacturer & Technical Reference
Audi Technical Reference (Fuel Trim & Air/O2 Metering)