# Audi P0135: Defective Oxygen Sensor/Air Fuel Ratio Sensor, defective Oxygen Sensor/Air Fuel Ratio Sensor Heater Circuit, Exhaust System Leak, Intake Air System leak, Low Fuel Pressure, Defective Engine Coolant Temperature Sensor, Defective sensor wiring and or circuit problem, PCM software needs to be updated, Defective PCM

> **Quick Answer:** Audi fault code P0135 indicates Defective Oxygen Sensor/Air Fuel Ratio Sensor, defective Oxygen Sensor/Air Fuel Ratio Sensor Heater Circuit, Exhaust System Leak, Intake Air System leak, Low Fuel Pressure, Defective Engine Coolant Temperature Sensor, Defective sensor wiring and or circuit problem, PCM software needs to be updated, Defective PCM. Usually safe for short trips if no severe drivability or safety warnings are active. Typical professional repair costs $130–$518.

- **URL:** https://faultcodes.org/automotive/audi-p0135
- **Category:** Automotive & OBD-II
- **Brand / Standard:** Audi
- **System Area:** Fuel Trim & Air/O2 Metering
- **Severity:** Moderate — Plan Repair
- **Safe to Operate?:** Yes (Short Term)
- **DIY Difficulty:** Moderate (Intermediate)
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
Manufacturer-specific Audi diagnostic trouble code P0135: Defective Oxygen Sensor/Air Fuel Ratio Sensor, defective Oxygen Sensor/Air Fuel Ratio Sensor Heater Circuit, Exhaust System Leak, Intake Air System leak, Low Fuel Pressure, Defective Engine Coolant Temperature Sensor, Defective sensor wiring and or circuit problem, PCM software needs to be updated, Defective PCM.

## Common Symptoms
- Warning indicator or active diagnostic code P0135
- Irregular behavior in Fuel Trim & Air/O2 Metering

## Most Likely Root Causes
- Faulty sensor or actuator in Fuel Trim & Air/O2 Metering
- Damaged, corroded, or loose wiring harness connector

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around Fuel Trim & Air/O2 Metering.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement Fuel Trim & Air/O2 Metering.
5. Clear fault memory and run a verification cycle to confirm P0135 does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $45–$218 | $130–$518 |
| GBP | £36–£172 | £103–£413 |
| CAD | CA$61–CA$293 | CA$174–CA$696 |
| EUR | €42–€202 | €120–€480 |
| CHF | CHF 48–CHF 232 | CHF 158–CHF 634 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code P0135?
Usually safe for short trips if no severe drivability or safety warnings are active.

### How much does it cost to repair P0135?
DIY replacement parts average $45–$218, while professional service averages $130–$518.

### Will resetting P0135 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

