FaultCodes.org
P1146SubaruPowertrain & Engine ManagementTechnical Reference· Updated: Nov 22, 2026

Subaru P1146 Fault Code: Pressure Sensor Circuit Range Performance Problem High Input

Subaru P1146 (Powertrain & Engine Management): Pressure Sensor Circuit Range Performance Problem High Input.

Quick AnswerModerate — Plan Repair

Subaru fault code P1146 indicates Pressure Sensor Circuit Range Performance Problem High Input. Usually safe for short trips if no severe drivability or safety warnings are active. Typical professional repair costs $130–$594.

Safe to Operate?
Yes (Short Term)
DIY Difficulty
Moderate (Intermediate)
System
Powertrain & Engine Management
Professional Repair
$130 – $594

What This Fault Code Means

Manufacturer-specific Subaru diagnostic trouble code P1146: Pressure Sensor Circuit Range Performance Problem High Input.

Common Symptoms

  • Warning indicator or active diagnostic code P1146
  • Irregular behavior in Powertrain & Engine Management

Most Likely Root Causes

  • Faulty sensor or actuator in Powertrain & Engine Management
  • Damaged, corroded, or loose wiring harness connector

Diagnostic Checks Before Replacing Parts

Verify the exact faulty component before ordering replacements.

  1. 1Read stored freeze-frame data and companion codes alongside P1146.
  2. 2Inspect electrical connectors, fuses, and harnesses connected to Powertrain & Engine Management.
  3. 3Verify live sensor telemetry before ordering replacement components.

Interactive Symptom Triage

Answer 3 quick checks to narrow down the faulty component before spending money on parts.

Check 1 of 3

Are any companion fault codes stored alongside P1146?

Step-by-Step Troubleshooting & Fix

  1. 1Scan for companion fault codes and address upstream circuit issues first.
  2. 2Visually inspect wiring harnesses, plugs, and hoses around Powertrain & Engine Management.
  3. 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
  4. 4Repair damaged wiring or install an OEM-grade replacement Powertrain & Engine Management.
  5. 5Clear fault memory and run a verification cycle to confirm P1146 does not return.

Estimated Repair Cost Benchmark

Typical DIY parts and certified technician labor ranges. Select a currency below.

Currency:
Repair PathUSD
DIY Parts Only$45 – $249
Professional Repair (Parts + Labor)$130 – $594

Frequently Asked Questions

Is it safe to keep operating with fault code P1146?

Usually safe for short trips if no severe drivability or safety warnings are active.

How much does it cost to repair P1146?

DIY replacement parts average $45–$249, while professional service averages $130–$594.

Will resetting P1146 fix the problem permanently?

No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

Related Searches & Questions

P1146 fault code meaningP1146 repair costhow to fix P1146

Manufacturer & Technical Reference

Subaru Technical Reference (Powertrain & Engine Management)

Related Fault Codes

Auto & OBD-II →
Subaru P1146 Fault Code: Pressure Sensor Circuit… — Fixes & Cost | FaultCodes.org