U0017 Fault Code: Medium Speed CAN Communication Bus (-) High
OBD-II U0017 (CAN Bus & Network Communication): Medium Speed CAN Communication Bus (-) High.
OBD-II fault code U0017 indicates Medium Speed CAN Communication Bus (-) High. Usually safe for short trips if no severe drivability or safety warnings are active. Typical professional repair costs $54–$756.
- Safe to Operate?
- Yes (Short Term)
- DIY Difficulty
- Moderate (Intermediate)
- System
- CAN Bus & Network Communication
- Professional Repair
- $54 – $756
What This Fault Code Means
U0017 means CAN-Low on the medium-speed CAN, the (-) wire, is held too high, as a rule by contact with battery or another supply voltage. On a differential bus of the high-speed type this short is fatal for traffic: the line cannot be pulled down, no dominant bit appears, and onsemi and NXP both class it among the shorts that make transmission impossible. All body and comfort modules on the segment drop out at once, the gateway records missing messages, and functions such as climate control, locking or the radio may stop responding until the short is removed. No manufacturer documents U0017 publicly; the analogy rests on Saab's terminated two-wire mid-speed GMLAN. With ignition on, CAN-Low near battery voltage confirms the fault.
Common Symptoms
- All comfort and infotainment modules out at once
- Climate, locking or radio not responding
Most Likely Root Causes
- Medium-speed CAN-Low chafed against a supply wire
- Moisture or bent pin linking CAN-Low to a supply contact
- Accessory wiring connected to the comfort bus by mistake
Diagnostic Checks Before Replacing Parts
Verify the exact faulty component before ordering replacements.
- 1Read stored freeze-frame data and companion codes alongside U0017.
- 2Inspect electrical connectors, fuses, and harnesses connected to Can Low Wire.
- 3Verify live sensor telemetry before ordering replacement components.
Interactive Symptom Triage
Answer 3 quick checks to narrow down the faulty component before spending money on parts.
Are any companion fault codes stored alongside U0017?
Step-by-Step Troubleshooting & Fix
- 1Scan for companion fault codes and address upstream circuit issues first.
- 2Visually inspect wiring harnesses, plugs, and hoses around Can Low Wire.
- 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
- 4Repair damaged wiring or install an OEM-grade replacement Can Low Wire.
- 5Clear fault memory and run a verification cycle to confirm U0017 does not return.
Estimated Repair Cost Benchmark
Typical DIY parts and certified technician labor ranges. Select a currency below.
| Repair Path | USD |
|---|---|
| DIY Parts Only | $19 – $318 |
| Professional Repair (Parts + Labor) | $54 – $756 |
Frequently Asked Questions
Is it safe to keep operating with fault code U0017?
Usually safe for short trips if no severe drivability or safety warnings are active.
How much does it cost to repair U0017?
DIY replacement parts average $19–$318, while professional service averages $54–$756.
Will resetting U0017 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.
Related Searches & Questions
Manufacturer & Technical Reference
OBD-II Technical Reference (CAN Bus & Network Communication)