U0012 Fault Code: Medium Speed CAN Communication Bus (+) Open
OBD-II U0012 (CAN Bus & Network Communication): Medium Speed CAN Communication Bus (+) Open.
OBD-II fault code U0012 indicates Medium Speed CAN Communication Bus (+) Open. Usually safe for short trips if no severe drivability or safety warnings are active. Typical professional repair costs $54–$648.
- Safe to Operate?
- Yes (Short Term)
- DIY Difficulty
- Moderate (Intermediate)
- System
- CAN Bus & Network Communication
- Professional Repair
- $54 – $648
What This Fault Code Means
U0012 reports an interruption of CAN-High, the (+) wire of the medium-speed CAN. Saab's mid-speed GMLAN uses the same two-wire layout as the fast bus, with a terminating resistor between (+) and (-), so a break isolates the modules downstream and alters the resistance seen between the lines. Ford's F-Super Duty illustrates the effect at vehicle level: if connector C408 stays unplugged after the pickup box is removed, MS-CAN traffic is cut and climate control, front controls and headlamp logic stop working. No manufacturer documents U0012 with its J2012 meaning; Alfa Romeo uses U0012-14 and -15 for the up circuit of its DNA selector instead. Check terminals and splices of the medium-speed pair, especially at doors, tailgates and upfitter bodies.
Common Symptoms
- Comfort and body modules behind the break inoperative
- Climate, lighting or switch panel functions missing
Most Likely Root Causes
- Body or upfitter connector in the medium-speed (+) path left open
- CAN-High conductor broken in a door or tailgate harness
- Corroded or loose CAN-High terminal
Diagnostic Checks Before Replacing Parts
Verify the exact faulty component before ordering replacements.
- 1Read stored freeze-frame data and companion codes alongside U0012.
- 2Inspect electrical connectors, fuses, and harnesses connected to Can High Wire.
- 3Verify live sensor telemetry before ordering replacement components.
Interactive Symptom Triage
Answer 3 quick checks to narrow down the faulty component before spending money on parts.
Are any companion fault codes stored alongside U0012?
Step-by-Step Troubleshooting & Fix
- 1Scan for companion fault codes and address upstream circuit issues first.
- 2Visually inspect wiring harnesses, plugs, and hoses around Can High Wire.
- 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
- 4Repair damaged wiring or install an OEM-grade replacement Can High Wire.
- 5Clear fault memory and run a verification cycle to confirm U0012 does not return.
Estimated Repair Cost Benchmark
Typical DIY parts and certified technician labor ranges. Select a currency below.
| Repair Path | USD |
|---|---|
| DIY Parts Only | $19 – $272 |
| Professional Repair (Parts + Labor) | $54 – $648 |
Frequently Asked Questions
Is it safe to keep operating with fault code U0012?
Usually safe for short trips if no severe drivability or safety warnings are active.
How much does it cost to repair U0012?
DIY replacement parts average $19–$272, while professional service averages $54–$648.
Will resetting U0012 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.
Related Searches & Questions
Manufacturer & Technical Reference
OBD-II Technical Reference (CAN Bus & Network Communication)