FaultCodes.org
P0723OBD-IITransmission & DrivetrainTechnical Reference· Updated: Nov 22, 2026

P0723 Fault Code: Output Shaft Speed Sensor Circuit Intermittent

OBD-II P0723 (Transmission & Drivetrain): Output Shaft Speed Sensor Circuit Intermittent.

Quick AnswerHigh — Service Soon

OBD-II fault code P0723 indicates Output Shaft Speed Sensor Circuit Intermittent. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $86–$486.

Safe to Operate?
No — Risk of Damage
DIY Difficulty
Moderate (Intermediate)
System
Transmission & Drivetrain
Professional Repair
$86 – $486

What This Fault Code Means

The output shaft speed sensor (Hall or inductive) reports the speed of the transmission output; it gives the gear ratio together with input speed and on many vehicles also the road speed for speedometer and cruise control. P0723 means the output speed drops or jumps briefly. GM's 2006 tables flag road speed falling below 61 rpm while driving; the 2019–2025 modules count sudden drops (for example 700 rpm) and fail after more than five, after one trip. In Ford vehicles the ZF 6HP26 flags a drop of more than 1000 rpm with the converter clutch locked, the CFT30 more than 6000 rpm per second. The speedometer needle twitches, shifts become erratic and limp mode may follow at times. Loose contacts are the usual cause.

Common Symptoms

  • Speedometer needle twitches or drops briefly
  • Occasional wrong shifts or downshift jolts
  • Warning lamp
  • Limp mode at times

Most Likely Root Causes

  • Loose contact, corroded connector or chafing
  • Electrical interference (shielding, ground, added consumers)
  • Metal debris on the sensor or loose mounting
  • Sensor faulty internally (temperature-dependent)

Diagnostic Checks Before Replacing Parts

Verify the exact faulty component before ordering replacements.

  1. 1Read stored freeze-frame data and companion codes alongside P0723.
  2. 2Inspect electrical connectors, fuses, and harnesses connected to Output Speed Sensor.
  3. 3Verify live sensor telemetry before ordering replacement components.

Interactive Symptom Triage

Answer 3 quick checks to narrow down the faulty component before spending money on parts.

Check 1 of 3

Are any companion fault codes stored alongside P0723?

Step-by-Step Troubleshooting & Fix

  1. 1Scan for companion fault codes and address upstream circuit issues first.
  2. 2Visually inspect wiring harnesses, plugs, and hoses around Output Speed Sensor.
  3. 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
  4. 4Repair damaged wiring or install an OEM-grade replacement Output Speed Sensor.
  5. 5Clear fault memory and run a verification cycle to confirm P0723 does not return.

Estimated Repair Cost Benchmark

Typical DIY parts and certified technician labor ranges. Select a currency below.

Currency:
Repair PathUSD
DIY Parts Only$30 – $204
Professional Repair (Parts + Labor)$86 – $486

Frequently Asked Questions

Is it safe to keep operating with fault code P0723?

Avoid prolonged operation until inspected to prevent secondary component damage.

How much does it cost to repair P0723?

DIY replacement parts average $30–$204, while professional service averages $86–$486.

Will resetting P0723 fix the problem permanently?

No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

Related Searches & Questions

P0723 fault code meaningP0723 repair costhow to fix P0723

Manufacturer & Technical Reference

OBD-II Technical Reference (Transmission & Drivetrain)

Related Fault Codes

Auto & OBD-II →
P0723 Fault Code: Output Shaft Speed Sensor Circuit Intermittent | FaultCodes.org