FaultCodes.org
P0708OBD-IITransmission & DrivetrainTechnical Reference· Updated: Nov 22, 2026

P0708 Fault Code: Transmission Range Sensor A Circuit High

OBD-II P0708 (Transmission & Drivetrain): Transmission Range Sensor A Circuit High.

Quick AnswerHigh — Service Soon

OBD-II fault code P0708 indicates Transmission Range Sensor A Circuit High. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $86–$648.

Safe to Operate?
No — Risk of Damage
DIY Difficulty
Moderate (Intermediate)
System
Transmission & Drivetrain
Professional Repair
$86 – $648

What This Fault Code Means

The transmission range sensor (selector or multifunction switch, PRNDL) reports the selected range; it may be a multi-contact switch with a bit pattern per position, an analog sensor with two opposing voltages adding up to 5 V, or a contactless PWM sensor. Its second channel has its own codes (P2801–P2805). P0708 means the sensor A signal is too high – a short to voltage or, depending on the circuit, an open line pulled up. GM's T87A transmission module flags a PWM duty cycle above 91.2 % for 1.8 s within 2.25 s, lamp in the first trip; Ford flags a duty cycle above 90 %, an analog sensor above 4.8 V for 5 s, a dual-analog channel above 4.84 V for 200 ms, and explicitly an open circuit on its digital sensor (all switches open, e.g. unplugged); Saab's 9-5 (9650) above 4.87 V for 100 ms twice, with 2nd gear held and a restart interlock.

Common Symptoms

  • Check engine and/or transmission warning lamp
  • Transmission limp mode, fixed gear, harsh shifts
  • Starting problems in P/N or start interlock
  • Wrong gear indication, reversing light not working

Most Likely Root Causes

  • Sensor connector off or signal/ground wire open
  • Signal wire shorted to voltage
  • Sensor faulty internally
  • Poor sensor or transmission ground

Diagnostic Checks Before Replacing Parts

Verify the exact faulty component before ordering replacements.

  1. 1Read stored freeze-frame data and companion codes alongside P0708.
  2. 2Inspect electrical connectors, fuses, and harnesses connected to Transmission Range Sensor.
  3. 3Verify live sensor telemetry before ordering replacement components.

Interactive Symptom Triage

Answer 3 quick checks to narrow down the faulty component before spending money on parts.

Check 1 of 3

Are any companion fault codes stored alongside P0708?

Step-by-Step Troubleshooting & Fix

  1. 1Scan for companion fault codes and address upstream circuit issues first.
  2. 2Visually inspect wiring harnesses, plugs, and hoses around Transmission Range Sensor.
  3. 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
  4. 4Repair damaged wiring or install an OEM-grade replacement Transmission Range Sensor.
  5. 5Clear fault memory and run a verification cycle to confirm P0708 does not return.

Estimated Repair Cost Benchmark

Typical DIY parts and certified technician labor ranges. Select a currency below.

Currency:
Repair PathUSD
DIY Parts Only$30 – $272
Professional Repair (Parts + Labor)$86 – $648

Frequently Asked Questions

Is it safe to keep operating with fault code P0708?

Avoid prolonged operation until inspected to prevent secondary component damage.

How much does it cost to repair P0708?

DIY replacement parts average $30–$272, while professional service averages $86–$648.

Will resetting P0708 fix the problem permanently?

No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

Related Searches & Questions

P0708 fault code meaningP0708 repair costhow to fix P0708

Manufacturer & Technical Reference

OBD-II Technical Reference (Transmission & Drivetrain)

Related Fault Codes

Auto & OBD-II →
P0708 Fault Code: Transmission Range Sensor A Circuit High | FaultCodes.org