FaultCodes.org
P043COBD-IICatalytic & Exhaust EmissionsTechnical Reference· Updated: Nov 22, 2026

P043C Fault Code: Catalyst Temperature Sensor Circuit Low Bank 2 Sensor 2

OBD-II P043C (Catalytic & Exhaust Emissions): Catalyst Temperature Sensor Circuit Low Bank 2 Sensor 2.

Quick AnswerModerate — Plan Repair

OBD-II fault code P043C indicates Catalyst Temperature Sensor Circuit Low Bank 2 Sensor 2. Usually safe for short trips if no severe drivability or safety warnings are active. Typical professional repair costs $65–$324.

Safe to Operate?
Yes (Short Term)
DIY Difficulty
Moderate (Intermediate)
System
Catalytic & Exhaust Emissions
Professional Repair
$65 – $324

What This Fault Code Means

Some engines – mainly diesels – measure the temperature at or in the catalyst with a thermistor in a voltage divider instead of only modelling it; most makers report exhaust temperature sensors under P0544 ff, P2031 ff or P2080 ff instead. Sensor 2 of bank 2 is a second, further downstream catalyst temperature sensor on the side without cylinder 1. P043C means the signal voltage is below its lower limit – typically the signal wire is shorted to ground or the sensor is shorted internally. No manufacturer document available to us uses this code; the description follows CARB, which requires input circuits to be checked for circuit faults and plausibility, and the comparable exhaust temperature sensors.

Common Symptoms

  • Check engine light on
  • Usually no noticeable change (substitute value from the model)
  • Diesel: filter regeneration distorted or blocked, possibly further codes such as P2459 or P0420

Most Likely Root Causes

  • Signal wire shorted to ground (chafed)
  • Sensor shorted internally
  • Water or corrosion in the connector
  • Engine module

Diagnostic Checks Before Replacing Parts

Verify the exact faulty component before ordering replacements.

  1. 1Read stored freeze-frame data and companion codes alongside P043C.
  2. 2Inspect electrical connectors, fuses, and harnesses connected to Catalyst Temperature Sensor B2S2.
  3. 3Verify live sensor telemetry before ordering replacement components.

Interactive Symptom Triage

Answer 3 quick checks to narrow down the faulty component before spending money on parts.

Check 1 of 3

Are any companion fault codes stored alongside P043C?

Step-by-Step Troubleshooting & Fix

  1. 1Scan for companion fault codes and address upstream circuit issues first.
  2. 2Visually inspect wiring harnesses, plugs, and hoses around Catalyst Temperature Sensor B2S2.
  3. 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
  4. 4Repair damaged wiring or install an OEM-grade replacement Catalyst Temperature Sensor B2S2.
  5. 5Clear fault memory and run a verification cycle to confirm P043C does not return.

Estimated Repair Cost Benchmark

Typical DIY parts and certified technician labor ranges. Select a currency below.

Currency:
Repair PathUSD
DIY Parts Only$23 – $136
Professional Repair (Parts + Labor)$65 – $324

Frequently Asked Questions

Is it safe to keep operating with fault code P043C?

Usually safe for short trips if no severe drivability or safety warnings are active.

How much does it cost to repair P043C?

DIY replacement parts average $23–$136, while professional service averages $65–$324.

Will resetting P043C fix the problem permanently?

No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

Related Searches & Questions

P043C fault code meaningP043C repair costhow to fix P043C

Manufacturer & Technical Reference

OBD-II Technical Reference (Catalytic & Exhaust Emissions)

Related Fault Codes

Auto & OBD-II →
P043C Fault Code: Catalyst Temperature Sensor… — Fixes & Cost | FaultCodes.org