P0422 Fault Code: Catalyst 2 Efficiency Below Threshold Bank 1
OBD-II P0422 (Catalytic & Exhaust Emissions): Catalyst 2 Efficiency Below Threshold Bank 1.
OBD-II fault code P0422 indicates Catalyst 2 Efficiency Below Threshold Bank 1. Usually safe for short trips if no severe drivability or safety warnings are active. Typical professional repair costs $432–$2700.
- Safe to Operate?
- Yes (Short Term)
- DIY Difficulty
- Moderate (Intermediate)
- System
- Catalytic & Exhaust Emissions
- Professional Repair
- $432 – $2,700
What This Fault Code Means
Catalyst 2 is the second catalyst in the flow direction of bank 1 (the side with cylinder 1) – the main or underfloor catalyst behind the close-coupled one; the older wording was Main Catalyst. P0422 means it no longer converts enough. Only GM's small diesels are documented with this code: they assess the underfloor oxidation catalyst separately from the close-coupled one (P0421) by heat balance during filter regeneration, with an exhaust fuel injector ahead of it. Petrol engines with several catalysts usually report P0420 instead.
Common Symptoms
- Check engine light on
- Emission test problems
- Diesel: possibly more frequent filter regenerations
Most Likely Root Causes
- Main or underfloor catalyst aged or poisoned
- Diesel: exhaust fuel injector coked, doses too little
- Temperature or oxygen sensor after the catalyst wrong
- Misfire or mixture fault as prior damage
Diagnostic Checks Before Replacing Parts
Verify the exact faulty component before ordering replacements.
- 1Read stored freeze-frame data and companion codes alongside P0422.
- 2Inspect electrical connectors, fuses, and harnesses connected to Underfloor Catalyst.
- 3Verify live sensor telemetry before ordering replacement components.
Interactive Symptom Triage
Answer 3 quick checks to narrow down the faulty component before spending money on parts.
Are any companion fault codes stored alongside P0422?
Step-by-Step Troubleshooting & Fix
- 1Scan for companion fault codes and address upstream circuit issues first.
- 2Visually inspect wiring harnesses, plugs, and hoses around Underfloor Catalyst.
- 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
- 4Repair damaged wiring or install an OEM-grade replacement Underfloor Catalyst.
- 5Clear fault memory and run a verification cycle to confirm P0422 does not return.
Estimated Repair Cost Benchmark
Typical DIY parts and certified technician labor ranges. Select a currency below.
| Repair Path | USD |
|---|---|
| DIY Parts Only | $151 – $1,134 |
| Professional Repair (Parts + Labor) | $432 – $2,700 |
Frequently Asked Questions
Is it safe to keep operating with fault code P0422?
Usually safe for short trips if no severe drivability or safety warnings are active.
How much does it cost to repair P0422?
DIY replacement parts average $151–$1134, while professional service averages $432–$2700.
Will resetting P0422 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.
Related Searches & Questions
Manufacturer & Technical Reference
OBD-II Technical Reference (Catalytic & Exhaust Emissions)