P0326 Fault Code: Knock/Combustion Vibration Sensor A Circuit Range/Performance
OBD-II P0326 (Ignition & Misfire System): Knock/Combustion Vibration Sensor A Circuit Range/Performance.
OBD-II fault code P0326 indicates Knock/Combustion Vibration Sensor A Circuit Range/Performance. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $43–$432.
- Safe to Operate?
- No — Risk of Damage
- DIY Difficulty
- Moderate (Intermediate)
- System
- Ignition & Misfire System
- Professional Repair
- $43 – $432
What This Fault Code Means
The knock sensor is a piezoelectric structure-borne sound sensor bolted to the engine block; the module evaluates its signal per cylinder and retards ignition when it detects knock. Sensor A is the first sensor (bank 1 or a single sensor). With a fault the module retards ignition across the board as protection – noticeable loss of power and higher consumption. P0326 means the circuit is electrically sound but the signal is implausible. GM sets it when the filtered background noise stays below a threshold – typically a loose sensor or one not bolted down properly – in the first trip; Saab's GM-based engines also when excessive knock persists on several cylinders or a whole bank for 8–10 s. Ford does not use this code.
Common Symptoms
- Check engine light on
- Loss of power, sluggish response from ignition retard
- Higher fuel consumption
Most Likely Root Causes
- Sensor loose, wrongly torqued or mounted with sealant or on a dirty surface
- Engine software or calibration (bulletins for some models)
- Genuine knock on a whole bank or mechanical noise
- Sensor aged or damaged (low sensitivity)
Diagnostic Checks Before Replacing Parts
Verify the exact faulty component before ordering replacements.
- 1Read stored freeze-frame data and companion codes alongside P0326.
- 2Inspect electrical connectors, fuses, and harnesses connected to Knock Sensor A.
- 3Verify live sensor telemetry before ordering replacement components.
Interactive Symptom Triage
Answer 3 quick checks to narrow down the faulty component before spending money on parts.
Are any companion fault codes stored alongside P0326?
Step-by-Step Troubleshooting & Fix
- 1Scan for companion fault codes and address upstream circuit issues first.
- 2Visually inspect wiring harnesses, plugs, and hoses around Knock Sensor A.
- 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
- 4Repair damaged wiring or install an OEM-grade replacement Knock Sensor A.
- 5Clear fault memory and run a verification cycle to confirm P0326 does not return.
Estimated Repair Cost Benchmark
Typical DIY parts and certified technician labor ranges. Select a currency below.
| Repair Path | USD |
|---|---|
| DIY Parts Only | $16 – $181 |
| Professional Repair (Parts + Labor) | $43 – $432 |
Frequently Asked Questions
Is it safe to keep operating with fault code P0326?
Avoid prolonged operation until inspected to prevent secondary component damage.
How much does it cost to repair P0326?
DIY replacement parts average $16–$181, while professional service averages $43–$432.
Will resetting P0326 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.
Related Searches & Questions
Manufacturer & Technical Reference
OBD-II Technical Reference (Ignition & Misfire System)