P0148 Fault Code: Fuel Delivery Error
OBD-II P0148 (Fuel Trim & Air/O2 Metering): Fuel Delivery Error.
OBD-II fault code P0148 indicates Fuel Delivery Error. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $54–$2700.
- Safe to Operate?
- No — Risk of Damage
- DIY Difficulty
- Professional Recommended
- System
- Fuel Trim & Air/O2 Metering
- Professional Repair
- $54 – $2,700
What This Fault Code Means
P0148 is an early, rather unspecific OBD II code: the control module finds that the fuel delivered does not match what was requested. Saab's 3.0 V6 diesel (Isuzu) uses it for leak detection: from the balance of quantity and rail pressure it recognises a leak of 90 mm³ per crankshaft revolution, monitored continuously up to 6,400 rpm, and then shuts the engine off – a restart is only possible in the next drive cycle. Ford lists P0148 in the fuel monitor of its 2020–2023 petrol engines, alongside P0171/P0172, without describing the logic. Newer systems usually report such faults more precisely as P0087/P0088 (rail pressure) or P0093 (large leak).
Common Symptoms
- Check engine light on
- Engine stalls or will not restart (Saab: shut-off until next drive cycle)
- Loss of power, stumbling
- Fuel smell with an external leak
Most Likely Root Causes
- Fuel leak in the high-pressure or return section (line, rail, injector leakage)
- Fuel filter clogged or lift pump weak
- High-pressure or injection pump worn
- Pressure or volume control valve faulty
- Air in the fuel system (tank run dry)
Diagnostic Checks Before Replacing Parts
Verify the exact faulty component before ordering replacements.
- 1Read stored freeze-frame data and companion codes alongside P0148.
- 2Inspect electrical connectors, fuses, and harnesses connected to Fuel System.
- 3Verify live sensor telemetry before ordering replacement components.
Interactive Symptom Triage
Answer 3 quick checks to narrow down the faulty component before spending money on parts.
Are any companion fault codes stored alongside P0148?
Step-by-Step Troubleshooting & Fix
- 1Scan for companion fault codes and address upstream circuit issues first.
- 2Visually inspect wiring harnesses, plugs, and hoses around Fuel System.
- 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
- 4Repair damaged wiring or install an OEM-grade replacement Fuel System.
- 5Clear fault memory and run a verification cycle to confirm P0148 does not return.
Estimated Repair Cost Benchmark
Typical DIY parts and certified technician labor ranges. Select a currency below.
| Repair Path | USD |
|---|---|
| DIY Parts Only | $19 – $1,134 |
| Professional Repair (Parts + Labor) | $54 – $2,700 |
Certified Technician Service Checklist
This fault involves sealed safety, gas, or high-voltage systems. Share these details when requesting a repair quote.
- Share exact brand & fault code: P0148 (Fuel Trim & Air/O2 Metering)
- Record appliance/boiler serial, model plate, or pressure reading before calling
- Typical certified technician range: $54 – $2,700
Frequently Asked Questions
Is it safe to keep operating with fault code P0148?
Avoid prolonged operation until inspected to prevent secondary component damage.
How much does it cost to repair P0148?
DIY replacement parts average $19–$1134, while professional service averages $54–$2700.
Will resetting P0148 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.
Related Searches & Questions
Manufacturer & Technical Reference
OBD-II Technical Reference (Fuel Trim & Air/O2 Metering)