P002D Fault Code: B Camshaft Profile Actuator A Control Circuit/Open Bank 2
OBD-II P002D (Powertrain & Engine Management): B Camshaft Profile Actuator A Control Circuit/Open Bank 2.
OBD-II fault code P002D indicates B Camshaft Profile Actuator A Control Circuit/Open Bank 2. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $54–$540.
- Safe to Operate?
- No — Risk of Damage
- DIY Difficulty
- Moderate (Intermediate)
- System
- Powertrain & Engine Management
- Professional Repair
- $54 – $540
What This Fault Code Means
A camshaft profile actuator switches the exhaust camshaft (camshaft B) on bank 2 between two or more fixed cam profiles with different valve lift and duration, for example by shifting a cam piece axially or by locking rocker arms or tappets with oil pressure. Unlike a camshaft phaser it does not shift the timing continuously. The second letter "A" in the title numbers the actuator on this camshaft. This code is set when the control circuit of the actuator is open: no current flows when it is driven, because of a broken wire, an unplugged connector or an open coil. The engine usually stays on one profile, typically the base profile with low lift. Some manufacturers report these faults with their own codes instead. Bank 2 exists only on V and boxer engines.
Common Symptoms
- Check engine light on
- Less power at high engine speed because the profile does not switch
- Higher consumption or uneven part-load running, depending on the profile
- Engine speed may be limited
Most Likely Root Causes
- Connector at the actuator corroded, oil-soaked or loose
- Wire broken, e.g. at the valve cover
- Actuator coil open
- Output driver in the engine control module faulty
Diagnostic Checks Before Replacing Parts
Verify the exact faulty component before ordering replacements.
- 1Read stored freeze-frame data and companion codes alongside P002D.
- 2Inspect electrical connectors, fuses, and harnesses connected to Camshaft Profile Actuator Exhaust Bank2.
- 3Verify live sensor telemetry before ordering replacement components.
Interactive Symptom Triage
Answer 3 quick checks to narrow down the faulty component before spending money on parts.
Are any companion fault codes stored alongside P002D?
Step-by-Step Troubleshooting & Fix
- 1Scan for companion fault codes and address upstream circuit issues first.
- 2Visually inspect wiring harnesses, plugs, and hoses around Camshaft Profile Actuator Exhaust Bank2.
- 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
- 4Repair damaged wiring or install an OEM-grade replacement Camshaft Profile Actuator Exhaust Bank2.
- 5Clear fault memory and run a verification cycle to confirm P002D does not return.
Estimated Repair Cost Benchmark
Typical DIY parts and certified technician labor ranges. Select a currency below.
| Repair Path | USD |
|---|---|
| DIY Parts Only | $19 – $227 |
| Professional Repair (Parts + Labor) | $54 – $540 |
Frequently Asked Questions
Is it safe to keep operating with fault code P002D?
Avoid prolonged operation until inspected to prevent secondary component damage.
How much does it cost to repair P002D?
DIY replacement parts average $19–$227, while professional service averages $54–$540.
Will resetting P002D fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.
Related Searches & Questions
Manufacturer & Technical Reference
OBD-II Technical Reference (Powertrain & Engine Management)