FaultCodes.org
P0023OBD-IIPowertrain & Engine ManagementTechnical Reference· Updated: Nov 22, 2026

P0023 Fault Code: "B" Camshaft Position Actuator Circuit (Bank 2)

OBD-II P0023 (Powertrain & Engine Management): "B" Camshaft Position Actuator Circuit (Bank 2).

Quick AnswerHigh — Service Soon

OBD-II fault code P0023 indicates "B" Camshaft Position Actuator Circuit (Bank 2). Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $54–$324.

Safe to Operate?
No — Risk of Damage
DIY Difficulty
Moderate (Intermediate)
System
Powertrain & Engine Management
Professional Repair
$54 – $324

What This Fault Code Means

The engine control module drives the oil control valve (a pulse-width modulated solenoid) of the variable valve timing on the exhaust camshaft on bank 2. It checks the electrical state of this output and sets the code when the circuit is open, or when the measured state does not match the command, for example because of a short. Camshaft adjustment is then disabled and the phaser stays in its locked rest position: the engine keeps running, but with less torque and higher consumption. Bank 2 exists only on V and boxer engines; it is the cylinder bank without cylinder 1.

Common Symptoms

  • Check engine light on
  • Less pulling power at low and medium engine speed
  • Rough idle in some engines
  • Slightly higher fuel consumption

Most Likely Root Causes

  • Solenoid coil of the oil control valve open or shorted
  • Connector corroded, loose or soaked with engine oil wicking through the valve
  • Wiring harness chafed through or broken
  • Supply voltage missing, e.g. blown fuse
  • Output driver in the engine control module faulty

Diagnostic Checks Before Replacing Parts

Verify the exact faulty component before ordering replacements.

  1. 1Read stored freeze-frame data and companion codes alongside P0023.
  2. 2Inspect electrical connectors, fuses, and harnesses connected to Oil Control Valve Exhaust Bank2.
  3. 3Verify live sensor telemetry before ordering replacement components.

Interactive Symptom Triage

Answer 3 quick checks to narrow down the faulty component before spending money on parts.

Check 1 of 3

Are any companion fault codes stored alongside P0023?

Step-by-Step Troubleshooting & Fix

  1. 1Scan for companion fault codes and address upstream circuit issues first.
  2. 2Visually inspect wiring harnesses, plugs, and hoses around Oil Control Valve Exhaust Bank2.
  3. 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
  4. 4Repair damaged wiring or install an OEM-grade replacement Oil Control Valve Exhaust Bank2.
  5. 5Clear fault memory and run a verification cycle to confirm P0023 does not return.

Estimated Repair Cost Benchmark

Typical DIY parts and certified technician labor ranges. Select a currency below.

Currency:
Repair PathUSD
DIY Parts Only$19 – $136
Professional Repair (Parts + Labor)$54 – $324

Frequently Asked Questions

Is it safe to keep operating with fault code P0023?

Avoid prolonged operation until inspected to prevent secondary component damage.

How much does it cost to repair P0023?

DIY replacement parts average $19–$136, while professional service averages $54–$324.

Will resetting P0023 fix the problem permanently?

No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

Related Searches & Questions

P0023 fault code meaningP0023 repair costhow to fix P0023

Manufacturer & Technical Reference

OBD-II Technical Reference (Powertrain & Engine Management)

Related Fault Codes

Auto & OBD-II →
P0023 Fault Code: "B" Camshaft Position Actuator Circuit (Bank 2) | FaultCodes.org