FaultCodes.org
P001COBD-IIPowertrain & Engine ManagementTechnical Reference· Updated: Nov 22, 2026

P001C Fault Code: A Camshaft Profile Actuator A Control Circuit High Bank 1

OBD-II P001C (Powertrain & Engine Management): A Camshaft Profile Actuator A Control Circuit High Bank 1.

Quick AnswerHigh — Service Soon

OBD-II fault code P001C indicates A Camshaft Profile Actuator A Control Circuit High Bank 1. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $54–$540.

Safe to Operate?
No — Risk of Damage
DIY Difficulty
Moderate (Intermediate)
System
Powertrain & Engine Management
Professional Repair
$54 – $540

What This Fault Code Means

A camshaft profile actuator switches the intake camshaft (camshaft A) on bank 1 between two or more fixed cam profiles with different valve lift and duration, for example by shifting a cam piece axially or by locking rocker arms or tappets with oil pressure. Unlike a camshaft phaser it does not shift the timing continuously. The second letter "A" in the title numbers the actuator on this camshaft. This code is set when the control circuit reads too high, typically because of a short to battery voltage or overcurrent in the output stage. The engine usually stays on one profile, typically the base profile with low lift. Some manufacturers report these faults with their own codes instead.

Common Symptoms

  • Check engine light on
  • Less power at high engine speed because the profile does not switch
  • Higher consumption or uneven part-load running, depending on the profile
  • Engine speed may be limited

Most Likely Root Causes

  • Control wire shorted to battery voltage
  • Actuator coil shorted, causing overcurrent
  • Connector corroded or contaminated with oil
  • Output driver in the engine control module faulty

Diagnostic Checks Before Replacing Parts

Verify the exact faulty component before ordering replacements.

  1. 1Read stored freeze-frame data and companion codes alongside P001C.
  2. 2Inspect electrical connectors, fuses, and harnesses connected to Camshaft Profile Actuator Intake Bank1.
  3. 3Verify live sensor telemetry before ordering replacement components.

Interactive Symptom Triage

Answer 3 quick checks to narrow down the faulty component before spending money on parts.

Check 1 of 3

Are any companion fault codes stored alongside P001C?

Step-by-Step Troubleshooting & Fix

  1. 1Scan for companion fault codes and address upstream circuit issues first.
  2. 2Visually inspect wiring harnesses, plugs, and hoses around Camshaft Profile Actuator Intake Bank1.
  3. 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
  4. 4Repair damaged wiring or install an OEM-grade replacement Camshaft Profile Actuator Intake Bank1.
  5. 5Clear fault memory and run a verification cycle to confirm P001C does not return.

Estimated Repair Cost Benchmark

Typical DIY parts and certified technician labor ranges. Select a currency below.

Currency:
Repair PathUSD
DIY Parts Only$19 – $227
Professional Repair (Parts + Labor)$54 – $540

Frequently Asked Questions

Is it safe to keep operating with fault code P001C?

Avoid prolonged operation until inspected to prevent secondary component damage.

How much does it cost to repair P001C?

DIY replacement parts average $19–$227, while professional service averages $54–$540.

Will resetting P001C fix the problem permanently?

No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

Related Searches & Questions

P001C fault code meaningP001C repair costhow to fix P001C

Manufacturer & Technical Reference

OBD-II Technical Reference (Powertrain & Engine Management)

Related Fault Codes

Auto & OBD-II →
P001C Fault Code: A Camshaft Profile Actuator A… — Fixes & Cost | FaultCodes.org