FaultCodes.org
P000DOBD-IIPowertrain & Engine ManagementTechnical Reference· Updated: Nov 22, 2026

P000D Fault Code: B Camshaft Position Slow Response Bank 2

OBD-II P000D (Powertrain & Engine Management): B Camshaft Position Slow Response Bank 2.

Quick AnswerModerate — Plan Repair

OBD-II fault code P000D indicates B Camshaft Position Slow Response Bank 2. Usually safe for short trips if no severe drivability or safety warnings are active. Typical professional repair costs $65–$1620.

Safe to Operate?
Yes (Short Term)
DIY Difficulty
Moderate (Intermediate)
System
Powertrain & Engine Management
Professional Repair
$65 – $1,620

What This Fault Code Means

This monitor does not judge the end position of the exhaust camshaft on bank 2 but how fast it follows a change of the commanded angle. The code is set when the actual angle lags behind the target for too long during several adjustments. The adjustment speed depends directly on oil flow, so worn or wrong oil and a partly clogged screen are the usual causes. Drivability is often hardly affected; the fault is an early warning before the camshaft misses its target position altogether. Bank 2 exists only on V and boxer engines; it is the cylinder bank without cylinder 1.

Common Symptoms

  • Check engine light on
  • Slight hesitation when accelerating
  • Often no noticeable symptoms

Most Likely Root Causes

  • Oil too thick or too thin, sludged, or oil level low
  • Screen at the oil control valve partly clogged
  • Oil control valve sluggish
  • Cam phaser leaking internally or worn
  • Generally weak oil pressure, e.g. worn oil pump or bearings

Diagnostic Checks Before Replacing Parts

Verify the exact faulty component before ordering replacements.

  1. 1Read stored freeze-frame data and companion codes alongside P000D.
  2. 2Inspect electrical connectors, fuses, and harnesses connected to Cam Phaser Exhaust Bank2.
  3. 3Verify live sensor telemetry before ordering replacement components.

Interactive Symptom Triage

Answer 3 quick checks to narrow down the faulty component before spending money on parts.

Check 1 of 3

Are any companion fault codes stored alongside P000D?

Step-by-Step Troubleshooting & Fix

  1. 1Scan for companion fault codes and address upstream circuit issues first.
  2. 2Visually inspect wiring harnesses, plugs, and hoses around Cam Phaser Exhaust Bank2.
  3. 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
  4. 4Repair damaged wiring or install an OEM-grade replacement Cam Phaser Exhaust Bank2.
  5. 5Clear fault memory and run a verification cycle to confirm P000D does not return.

Estimated Repair Cost Benchmark

Typical DIY parts and certified technician labor ranges. Select a currency below.

Currency:
Repair PathUSD
DIY Parts Only$23 – $680
Professional Repair (Parts + Labor)$65 – $1,620

Frequently Asked Questions

Is it safe to keep operating with fault code P000D?

Usually safe for short trips if no severe drivability or safety warnings are active.

How much does it cost to repair P000D?

DIY replacement parts average $23–$680, while professional service averages $65–$1620.

Will resetting P000D fix the problem permanently?

No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

Related Searches & Questions

P000D fault code meaningP000D repair costhow to fix P000D

Manufacturer & Technical Reference

OBD-II Technical Reference (Powertrain & Engine Management)

Related Fault Codes

Auto & OBD-II →
P000D Fault Code: B Camshaft Position Slow Response Bank 2 | FaultCodes.org