FaultCodes.org
C0045OBD-IIChassis, ABS & Stability ControlTechnical Reference· Updated: Nov 22, 2026

C0045 Fault Code: Brake Pressure Sensor B

OBD-II C0045 (Chassis, ABS & Stability Control): Brake Pressure Sensor B.

Quick AnswerHigh — Service Soon

OBD-II fault code C0045 indicates Brake Pressure Sensor B. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $432–$2376.

Safe to Operate?
No — Risk of Damage
DIY Difficulty
Professional Recommended
System
Chassis, ABS & Stability Control
Professional Repair
$432 – $2,376

What This Fault Code Means

C0045 covers brake pressure sensor B, the second pressure transducer in the ABS/ESC hydraulic unit next to sensor A (C0044). Two sensors let the module watch both brake circuits or check one reading against the other for stability control, brake assist and brake-by-wire functions. The code sets for a signal out of range, an open or short, or a value that disagrees with sensor A or the pedal demand. Where the sensor sits inside an integrated brake unit, repair usually means replacing the whole unit. NHTSA's EPS safety report lists C0045 with this J2012 meaning. Older GM vehicles use C0045 for the left rear wheel speed sensor circuit instead (GM PIE0456, 16-NA-248), so the make decides what a stored C0045 means.

Common Symptoms

  • ABS or brake warning lamp on
  • Stability and assist functions disabled
  • Changed brake assist behaviour

Most Likely Root Causes

  • Pressure sensor failed or out of range
  • Fault internal to the integrated brake unit
  • Signal does not correlate with sensor A

Diagnostic Checks Before Replacing Parts

Verify the exact faulty component before ordering replacements.

  1. 1Read stored freeze-frame data and companion codes alongside C0045.
  2. 2Inspect electrical connectors, fuses, and harnesses connected to Brake Pressure Sensor B.
  3. 3Verify live sensor telemetry before ordering replacement components.

Interactive Symptom Triage

Answer 3 quick checks to narrow down the faulty component before spending money on parts.

Check 1 of 3

Are any companion fault codes stored alongside C0045?

Step-by-Step Troubleshooting & Fix

  1. 1Scan for companion fault codes and address upstream circuit issues first.
  2. 2Visually inspect wiring harnesses, plugs, and hoses around Brake Pressure Sensor B.
  3. 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
  4. 4Repair damaged wiring or install an OEM-grade replacement Brake Pressure Sensor B.
  5. 5Clear fault memory and run a verification cycle to confirm C0045 does not return.

Estimated Repair Cost Benchmark

Typical DIY parts and certified technician labor ranges. Select a currency below.

Currency:
Repair PathUSD
DIY Parts Only$151 – $998
Professional Repair (Parts + Labor)$432 – $2,376

Certified Technician Service Checklist

This fault involves sealed safety, gas, or high-voltage systems. Share these details when requesting a repair quote.

  • Share exact brand & fault code: C0045 (Chassis, ABS & Stability Control)
  • Record appliance/boiler serial, model plate, or pressure reading before calling
  • Typical certified technician range: $432 – $2,376

Frequently Asked Questions

Is it safe to keep operating with fault code C0045?

Avoid prolonged operation until inspected to prevent secondary component damage.

How much does it cost to repair C0045?

DIY replacement parts average $151–$998, while professional service averages $432–$2376.

Will resetting C0045 fix the problem permanently?

No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

Related Searches & Questions

C0045 fault code meaningC0045 repair costhow to fix C0045

Manufacturer & Technical Reference

OBD-II Technical Reference (Chassis, ABS & Stability Control)

Related Fault Codes

Auto & OBD-II →
C0045 Fault Code: Brake Pressure Sensor B — Causes, Fixes & Cost | FaultCodes.org