FaultCodes.org
C003FOBD-IIChassis, ABS & Stability ControlTechnical Reference· Updated: Nov 22, 2026

C003F Fault Code: Wheel Speed Sensors Rotation Direction Correlation

OBD-II C003F (Chassis, ABS & Stability Control): Wheel Speed Sensors Rotation Direction Correlation.

Quick AnswerHigh — Service Soon

OBD-II fault code C003F indicates Wheel Speed Sensors Rotation Direction Correlation. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $65–$540.

Safe to Operate?
No — Risk of Damage
DIY Difficulty
Moderate (Intermediate)
System
Chassis, ABS & Stability Control
Professional Repair
$65 – $540

What This Fault Code Means

A correlation code set when the directional information from the wheel speed sensors does not agree across wheels or with other motion inputs. Directional (bidirectional) wheel speed sensors tell the ABS/ESC module whether a wheel turns forward or backward, which the module uses for hill-hold, rollback detection and stability functions. The code stores when one wheel reports a rotation direction that is implausible against the others, the selected gear or the yaw and acceleration sensors. It points to a faulty directional sensor, its wiring or the tone ring. Affected functions are disabled and the ABS warning lamp is set while base braking remains. Direction-capable sensor ICs such as Allegro's A19302 send speed plus direction over PW or AK protocol. No manufacturer documents this code publicly.

Common Symptoms

  • ABS warning lamp on
  • Hill-hold or stability functions disabled
  • Incorrect rollback or direction detection

Most Likely Root Causes

  • Faulty directional wheel speed sensor
  • Damaged tone ring giving false direction
  • Sensor wiring fault or miswire

Diagnostic Checks Before Replacing Parts

Verify the exact faulty component before ordering replacements.

  1. 1Read stored freeze-frame data and companion codes alongside C003F.
  2. 2Inspect electrical connectors, fuses, and harnesses connected to Wheel Speed Sensors.
  3. 3Verify live sensor telemetry before ordering replacement components.

Interactive Symptom Triage

Answer 3 quick checks to narrow down the faulty component before spending money on parts.

Check 1 of 3

Are any companion fault codes stored alongside C003F?

Step-by-Step Troubleshooting & Fix

  1. 1Scan for companion fault codes and address upstream circuit issues first.
  2. 2Visually inspect wiring harnesses, plugs, and hoses around Wheel Speed Sensors.
  3. 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
  4. 4Repair damaged wiring or install an OEM-grade replacement Wheel Speed Sensors.
  5. 5Clear fault memory and run a verification cycle to confirm C003F does not return.

Estimated Repair Cost Benchmark

Typical DIY parts and certified technician labor ranges. Select a currency below.

Currency:
Repair PathUSD
DIY Parts Only$23 – $227
Professional Repair (Parts + Labor)$65 – $540

Frequently Asked Questions

Is it safe to keep operating with fault code C003F?

Avoid prolonged operation until inspected to prevent secondary component damage.

How much does it cost to repair C003F?

DIY replacement parts average $23–$227, while professional service averages $65–$540.

Will resetting C003F fix the problem permanently?

No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

Related Searches & Questions

C003F fault code meaningC003F repair costhow to fix C003F

Manufacturer & Technical Reference

OBD-II Technical Reference (Chassis, ABS & Stability Control)

Related Fault Codes

Auto & OBD-II →
C003F Fault Code: Wheel Speed Sensors Rotation Direction Correlation | FaultCodes.org