C0037 Fault Code: Left Rear Wheel Speed Sensor
OBD-II C0037 (Chassis, ABS & Stability Control): Left Rear Wheel Speed Sensor.
OBD-II fault code C0037 indicates Left Rear Wheel Speed Sensor. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $65–$432.
- Safe to Operate?
- No — Risk of Damage
- DIY Difficulty
- Moderate (Intermediate)
- System
- Chassis, ABS & Stability Control
- Professional Repair
- $65 – $432
What This Fault Code Means
Covers the left rear wheel speed sensor and its circuit, the rear-axle counterpart of C0031 and C0034. The active sensor reports rear wheel rotation to the ABS/ESC module for anti-lock, traction and stability control and electronic brake-force distribution. The module monitors the circuit for opens, shorts to power or ground, a signal outside the valid range and a missing signal while moving. Ford documents C0037 on 2020-2022 F-53 motorhome and F-59 commercial chassis, frequently caused by a bent or damaged sensor, and lists it with C003A/C0036 on 2021 Bronco and Ranger. A fault disables ABS, traction and stability control and lights the ABS warning lamp while base braking remains.
Common Symptoms
- ABS warning lamp on
- ABS and stability control disabled
- Speedometer may read erratically
Most Likely Root Causes
- Wheel speed sensor bent or failed
- Open, shorted or chafed sensor wiring
- Corroded sensor connector
Diagnostic Checks Before Replacing Parts
Verify the exact faulty component before ordering replacements.
- 1Read stored freeze-frame data and companion codes alongside C0037.
- 2Inspect electrical connectors, fuses, and harnesses connected to Lr Wss.
- 3Verify live sensor telemetry before ordering replacement components.
Interactive Symptom Triage
Answer 3 quick checks to narrow down the faulty component before spending money on parts.
Are any companion fault codes stored alongside C0037?
Step-by-Step Troubleshooting & Fix
- 1Scan for companion fault codes and address upstream circuit issues first.
- 2Visually inspect wiring harnesses, plugs, and hoses around Lr Wss.
- 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
- 4Repair damaged wiring or install an OEM-grade replacement Lr Wss.
- 5Clear fault memory and run a verification cycle to confirm C0037 does not return.
Estimated Repair Cost Benchmark
Typical DIY parts and certified technician labor ranges. Select a currency below.
| Repair Path | USD |
|---|---|
| DIY Parts Only | $23 – $181 |
| Professional Repair (Parts + Labor) | $65 – $432 |
Frequently Asked Questions
Is it safe to keep operating with fault code C0037?
Avoid prolonged operation until inspected to prevent secondary component damage.
How much does it cost to repair C0037?
DIY replacement parts average $23–$181, while professional service averages $65–$432.
Will resetting C0037 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.
Related Searches & Questions
Manufacturer & Technical Reference
OBD-II Technical Reference (Chassis, ABS & Stability Control)