FaultCodes.org
C0033OBD-IIChassis, ABS & Stability ControlTechnical Reference· Updated: Nov 22, 2026

C0033 Fault Code: Right Front Tone Wheel

OBD-II C0033 (Chassis, ABS & Stability Control): Right Front Tone Wheel.

Quick AnswerHigh — Service Soon

OBD-II fault code C0033 indicates Right Front Tone Wheel. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $108–$756.

Safe to Operate?
No — Risk of Damage
DIY Difficulty
Moderate (Intermediate)
System
Chassis, ABS & Stability Control
Professional Repair
$108 – $756

What This Fault Code Means

Covers the right front tone wheel (reluctor or encoder ring) read by the right front wheel speed sensor, the mirror of C0030. It is a signal-plausibility code: the module sees an erratic, noisy or intermittent speed signal consistent with a damaged, contaminated or loose tone ring rather than a sensor electrical failure. Volvo documents BCM-C0033 on the S80 together with a grinding noise at the wheel hub caused by a hub that has shifted within the steering knuckle. A fault disables ABS, traction and stability control and lights the ABS warning lamp while base braking remains available.

Common Symptoms

  • ABS warning lamp on
  • ABS and stability control disabled
  • Grinding noise from wheel hub

Most Likely Root Causes

  • Damaged or contaminated tone ring
  • Loose or displaced hub bearing
  • Excessive sensor-to-ring air gap

Diagnostic Checks Before Replacing Parts

Verify the exact faulty component before ordering replacements.

  1. 1Read stored freeze-frame data and companion codes alongside C0033.
  2. 2Inspect electrical connectors, fuses, and harnesses connected to Rf Tone Wheel.
  3. 3Verify live sensor telemetry before ordering replacement components.

Interactive Symptom Triage

Answer 3 quick checks to narrow down the faulty component before spending money on parts.

Check 1 of 3

Are any companion fault codes stored alongside C0033?

Step-by-Step Troubleshooting & Fix

  1. 1Scan for companion fault codes and address upstream circuit issues first.
  2. 2Visually inspect wiring harnesses, plugs, and hoses around Rf Tone Wheel.
  3. 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
  4. 4Repair damaged wiring or install an OEM-grade replacement Rf Tone Wheel.
  5. 5Clear fault memory and run a verification cycle to confirm C0033 does not return.

Estimated Repair Cost Benchmark

Typical DIY parts and certified technician labor ranges. Select a currency below.

Currency:
Repair PathUSD
DIY Parts Only$38 – $318
Professional Repair (Parts + Labor)$108 – $756

Frequently Asked Questions

Is it safe to keep operating with fault code C0033?

Avoid prolonged operation until inspected to prevent secondary component damage.

How much does it cost to repair C0033?

DIY replacement parts average $38–$318, while professional service averages $108–$756.

Will resetting C0033 fix the problem permanently?

No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

Related Searches & Questions

C0033 fault code meaningC0033 repair costhow to fix C0033

Manufacturer & Technical Reference

OBD-II Technical Reference (Chassis, ABS & Stability Control)

Related Fault Codes

Auto & OBD-II →
C0033 Fault Code: Right Front Tone Wheel — Causes, Fixes & Cost | FaultCodes.org