C0024 Fault Code: Brake Pedal Feedback Pressure Solenoid Circuit
OBD-II C0024 (Chassis, ABS & Stability Control): Brake Pedal Feedback Pressure Solenoid Circuit.
OBD-II fault code C0024 indicates Brake Pedal Feedback Pressure Solenoid Circuit. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $324–$2160.
- Safe to Operate?
- No — Risk of Damage
- DIY Difficulty
- Professional Recommended
- System
- Chassis, ABS & Stability Control
- Professional Repair
- $324 – $2,160
What This Fault Code Means
Covers the solenoid that generates brake pedal feedback pressure in an electronic or brake-by-wire braking system. Because the driver is hydraulically decoupled during controlled braking, a pedal-feel simulator uses this solenoid to build a controlled counter-pressure so the pedal feels natural. The module monitors the coil circuit for opens, shorts and out-of-range resistance and checks that feedback pressure tracks the command. GM documents C0024 on 2019-2020 Cadillac XT6, Chevrolet Blazer and GMC Acadia with reduced brake assist, warning messages in the driver display and an altered pedal feel. A fault alters pedal feel and may reduce controlled assist; the brake or ABS warning lamp is set.
Common Symptoms
- Changed or abnormal pedal feel
- Loss of brake assist, driver messages
- ABS or brake warning lamp on
Most Likely Root Causes
- Feedback solenoid open or shorted
- Harness or connector fault
- Internal brake actuation unit fault
Diagnostic Checks Before Replacing Parts
Verify the exact faulty component before ordering replacements.
- 1Read stored freeze-frame data and companion codes alongside C0024.
- 2Inspect electrical connectors, fuses, and harnesses connected to Pedal Feedback Solenoid.
- 3Verify live sensor telemetry before ordering replacement components.
Interactive Symptom Triage
Answer 3 quick checks to narrow down the faulty component before spending money on parts.
Are any companion fault codes stored alongside C0024?
Step-by-Step Troubleshooting & Fix
- 1Scan for companion fault codes and address upstream circuit issues first.
- 2Visually inspect wiring harnesses, plugs, and hoses around Pedal Feedback Solenoid.
- 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
- 4Repair damaged wiring or install an OEM-grade replacement Pedal Feedback Solenoid.
- 5Clear fault memory and run a verification cycle to confirm C0024 does not return.
Estimated Repair Cost Benchmark
Typical DIY parts and certified technician labor ranges. Select a currency below.
| Repair Path | USD |
|---|---|
| DIY Parts Only | $113 – $907 |
| Professional Repair (Parts + Labor) | $324 – $2,160 |
Certified Technician Service Checklist
This fault involves sealed safety, gas, or high-voltage systems. Share these details when requesting a repair quote.
- Share exact brand & fault code: C0024 (Chassis, ABS & Stability Control)
- Record appliance/boiler serial, model plate, or pressure reading before calling
- Typical certified technician range: $324 – $2,160
Frequently Asked Questions
Is it safe to keep operating with fault code C0024?
Avoid prolonged operation until inspected to prevent secondary component damage.
How much does it cost to repair C0024?
DIY replacement parts average $113–$907, while professional service averages $324–$2160.
Will resetting C0024 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.
Related Searches & Questions
Manufacturer & Technical Reference
OBD-II Technical Reference (Chassis, ABS & Stability Control)