FaultCodes.org
C0021OBD-IIChassis, ABS & Stability ControlTechnical Reference· Updated: Nov 22, 2026

C0021 Fault Code: Brake Booster Performance

OBD-II C0021 (Chassis, ABS & Stability Control): Brake Booster Performance.

Quick AnswerHigh — Service Soon

OBD-II fault code C0021 indicates Brake Booster Performance. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $270–$1944.

Safe to Operate?
No — Risk of Damage
DIY Difficulty
Professional Recommended
System
Chassis, ABS & Stability Control
Professional Repair
$270 – $1,944

What This Fault Code Means

A performance code for the power brake booster, set when the booster does not deliver the expected level of assist or does not respond to the control module as commanded. On vehicles with an electronic or vacuum booster the module compares driver pedal demand, measured boost and the resulting brake pressure, and stores the code when assist is weak, slow or inconsistent. GM documents C0021 setting on 2019-2020 Silverado and Sierra together with reduced engine power and service brake messages, in some cases after a module programming event with low battery voltage. The driver may feel a hard pedal and longer stopping distance; a warning message and the brake or ABS lamp appear.

Common Symptoms

  • Hard brake pedal and reduced assist
  • Service brake or reduced power message
  • ABS or brake warning lamp on

Most Likely Root Causes

  • Booster worn or not holding vacuum/pressure
  • Low battery voltage during module programming
  • Faulty boost or pressure sensor input

Diagnostic Checks Before Replacing Parts

Verify the exact faulty component before ordering replacements.

  1. 1Read stored freeze-frame data and companion codes alongside C0021.
  2. 2Inspect electrical connectors, fuses, and harnesses connected to Brake Booster.
  3. 3Verify live sensor telemetry before ordering replacement components.

Interactive Symptom Triage

Answer 3 quick checks to narrow down the faulty component before spending money on parts.

Check 1 of 3

Are any companion fault codes stored alongside C0021?

Step-by-Step Troubleshooting & Fix

  1. 1Scan for companion fault codes and address upstream circuit issues first.
  2. 2Visually inspect wiring harnesses, plugs, and hoses around Brake Booster.
  3. 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
  4. 4Repair damaged wiring or install an OEM-grade replacement Brake Booster.
  5. 5Clear fault memory and run a verification cycle to confirm C0021 does not return.

Estimated Repair Cost Benchmark

Typical DIY parts and certified technician labor ranges. Select a currency below.

Currency:
Repair PathUSD
DIY Parts Only$95 – $816
Professional Repair (Parts + Labor)$270 – $1,944

Certified Technician Service Checklist

This fault involves sealed safety, gas, or high-voltage systems. Share these details when requesting a repair quote.

  • Share exact brand & fault code: C0021 (Chassis, ABS & Stability Control)
  • Record appliance/boiler serial, model plate, or pressure reading before calling
  • Typical certified technician range: $270 – $1,944

Frequently Asked Questions

Is it safe to keep operating with fault code C0021?

Avoid prolonged operation until inspected to prevent secondary component damage.

How much does it cost to repair C0021?

DIY replacement parts average $95–$816, while professional service averages $270–$1944.

Will resetting C0021 fix the problem permanently?

No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

Related Searches & Questions

C0021 fault code meaningC0021 repair costhow to fix C0021

Manufacturer & Technical Reference

OBD-II Technical Reference (Chassis, ABS & Stability Control)

Related Fault Codes

Auto & OBD-II →
C0021 Fault Code: Brake Booster Performance — Causes, Fixes & Cost | FaultCodes.org