B002A Fault Code: Right Curtain Deployment Control 2
OBD-II B002A (Body Control, Airbag & Comfort): Right Curtain Deployment Control 2.
OBD-II fault code B002A indicates Right Curtain Deployment Control 2. Usually safe for short trips if no severe drivability or safety warnings are active. Typical professional repair costs $108–$1080.
- Safe to Operate?
- Yes (Short Term)
- DIY Difficulty
- Professional Recommended
- System
- Body Control, Airbag & Comfort
- Professional Repair
- $108 – $1,080
What This Fault Code Means
B002A is the second firing loop of the right curtain airbag, needed only where the right side has two curtain inflators or a separate curtain section for the rear seats. Mercedes-Benz uses it that way on the A-Class, CLA and GLB: B002A13 marks an open squib in the right rear window bag, while the front part reports B0029; a known trigger was poor contact at the control unit plug (LI54.21-P-070658). A TRW and Ford patent describes front-row and rear-row curtains that inflate separately and may be tethered together at the B-pillar. Where curtains also deploy in a rollover, FMVSS 226 requires a readiness indicator the driver can see. Airbag lamp on; head protection for the right rear seat may be missing.
Common Symptoms
- Airbag warning lamp on
- Head protection for the right rear seat may be missing
- Safety note: do not probe the airbag circuit yourself; unplug airbag connectors only with the battery disconnected and the stated wait time observed
Most Likely Root Causes
- Raised contact resistance at the restraint module connector (Mercedes LI54.21-P-070658)
- Damaged lead to the rear curtain section at the C-pillar or roof rail
- Internal fault in the rear right curtain airbag module
Diagnostic Checks Before Replacing Parts
Verify the exact faulty component before ordering replacements.
- 1Read stored freeze-frame data and companion codes alongside B002A.
- 2Inspect electrical connectors, fuses, and harnesses connected to Right Curtain Airbag.
- 3Verify live sensor telemetry before ordering replacement components.
Interactive Symptom Triage
Answer 3 quick checks to narrow down the faulty component before spending money on parts.
Are any companion fault codes stored alongside B002A?
Step-by-Step Troubleshooting & Fix
- 1Scan for companion fault codes and address upstream circuit issues first.
- 2Visually inspect wiring harnesses, plugs, and hoses around Right Curtain Airbag.
- 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
- 4Repair damaged wiring or install an OEM-grade replacement Right Curtain Airbag.
- 5Clear fault memory and run a verification cycle to confirm B002A does not return.
Estimated Repair Cost Benchmark
Typical DIY parts and certified technician labor ranges. Select a currency below.
| Repair Path | USD |
|---|---|
| DIY Parts Only | $38 – $454 |
| Professional Repair (Parts + Labor) | $108 – $1,080 |
Certified Technician Service Checklist
This fault involves sealed safety, gas, or high-voltage systems. Share these details when requesting a repair quote.
- Share exact brand & fault code: B002A (Body Control, Airbag & Comfort)
- Record appliance/boiler serial, model plate, or pressure reading before calling
- Typical certified technician range: $108 – $1,080
Frequently Asked Questions
Is it safe to keep operating with fault code B002A?
Usually safe for short trips if no severe drivability or safety warnings are active.
How much does it cost to repair B002A?
DIY replacement parts average $38–$454, while professional service averages $108–$1080.
Will resetting B002A fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.
Related Searches & Questions
Manufacturer & Technical Reference
OBD-II Technical Reference (Body Control, Airbag & Comfort)