B0022 Fault Code: Left Curtain Deployment Control 2
OBD-II B0022 (Body Control, Airbag & Comfort): Left Curtain Deployment Control 2.
OBD-II fault code B0022 indicates Left Curtain Deployment Control 2. Usually safe for short trips if no severe drivability or safety warnings are active. Typical professional repair costs $108–$1080.
- Safe to Operate?
- Yes (Short Term)
- DIY Difficulty
- Professional Recommended
- System
- Body Control, Airbag & Comfort
- Professional Repair
- $108 – $1,080
What This Fault Code Means
B0022 belongs to a second firing loop for the left curtain airbag. Mercedes-Benz shows what that means in practice: on the A-Class, CLA and GLB, B002213 is an open squib in the left rear window bag, the curtain section for the rear seats, while B0021 serves the front one (LI54.21-P-070658, version 1 of 2019 and version 4 of 2020). Cars with a single curtain inflator never set it. General Motors has older meanings for the number: the 2006 Saab 9-5 used it for driver frontal stage 1 resistance below 2.0 ohms, and Global A modules for the passenger belt retractor pretensioner, as on the 2009-11 Impala (PIC5396A) or the Saab 9-4X. The module and descriptor shown by the scan tool decide which part is meant. Airbag lamp on.
Common Symptoms
- Airbag warning lamp on
- Head protection for the left rear seat may be missing
- Safety note: do not probe the airbag circuit yourself; unplug airbag connectors only with the battery disconnected and the stated wait time observed
Most Likely Root Causes
- Raised contact resistance at the restraint module connector (Mercedes LI54.21-P-070658)
- Damaged lead to the rear curtain section at the C-pillar or roof rail
- Internal fault in the rear left curtain airbag module
- Fault or unsuitable software in the restraint control module
Diagnostic Checks Before Replacing Parts
Verify the exact faulty component before ordering replacements.
- 1Read stored freeze-frame data and companion codes alongside B0022.
- 2Inspect electrical connectors, fuses, and harnesses connected to Left Curtain Airbag.
- 3Verify live sensor telemetry before ordering replacement components.
Interactive Symptom Triage
Answer 3 quick checks to narrow down the faulty component before spending money on parts.
Are any companion fault codes stored alongside B0022?
Step-by-Step Troubleshooting & Fix
- 1Scan for companion fault codes and address upstream circuit issues first.
- 2Visually inspect wiring harnesses, plugs, and hoses around Left Curtain Airbag.
- 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
- 4Repair damaged wiring or install an OEM-grade replacement Left Curtain Airbag.
- 5Clear fault memory and run a verification cycle to confirm B0022 does not return.
Estimated Repair Cost Benchmark
Typical DIY parts and certified technician labor ranges. Select a currency below.
| Repair Path | USD |
|---|---|
| DIY Parts Only | $38 – $454 |
| Professional Repair (Parts + Labor) | $108 – $1,080 |
Certified Technician Service Checklist
This fault involves sealed safety, gas, or high-voltage systems. Share these details when requesting a repair quote.
- Share exact brand & fault code: B0022 (Body Control, Airbag & Comfort)
- Record appliance/boiler serial, model plate, or pressure reading before calling
- Typical certified technician range: $108 – $1,080
Frequently Asked Questions
Is it safe to keep operating with fault code B0022?
Usually safe for short trips if no severe drivability or safety warnings are active.
How much does it cost to repair B0022?
DIY replacement parts average $38–$454, while professional service averages $108–$1080.
Will resetting B0022 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.
Related Searches & Questions
Manufacturer & Technical Reference
OBD-II Technical Reference (Body Control, Airbag & Comfort)