FaultCodes.org
B0019OBD-IIBody Control, Airbag & ComfortTechnical Reference· Updated: Nov 22, 2026

B0019 Fault Code: Center Frontal Stage 2 Deployment Control

OBD-II B0019 (Body Control, Airbag & Comfort): Center Frontal Stage 2 Deployment Control.

Quick AnswerModerate — Plan Repair

OBD-II fault code B0019 indicates Center Frontal Stage 2 Deployment Control. Usually safe for short trips if no severe drivability or safety warnings are active. Typical professional repair costs $86–$1404.

Safe to Operate?
Yes (Short Term)
DIY Difficulty
Professional Recommended
System
Body Control, Airbag & Comfort
Professional Repair
$86 – $1,404

What This Fault Code Means

B0019 is the stage 2 member of the first-row center frontal series B0018 to B001A, meant for the second inflator charge of a middle-seat frontal airbag. No carmaker publicly documents the code with this meaning. General Motors uses B0019 widely, but for stage 1 of the passenger airbag in the instrument panel: on the Saab 9-4X 2011 sub-codes 01 and 02 mark shorts, 04 an open, 0D a loop reading that stays high and 0E one that stays low, while stage 2 of that bag is B0020. On the 2009-10 Chevrolet HHR, fretting corrosion in the in-line connector between body and dash harness raised loop resistance and set B0019 0D or 04 (PI0117B and a customer satisfaction program). On GM vehicles the passenger airbag therefore needs checking first. The airbag lamp is on.

Common Symptoms

  • Airbag warning lamp on
  • On GM the passenger frontal airbag stage 1 may not deploy
  • Safety note: do not probe the airbag circuit yourself; unplug airbag connectors only with the battery disconnected and the stated wait time observed

Most Likely Root Causes

  • On GM vehicles fretting corrosion in the passenger airbag in-line connector (HHR PI0117B)
  • Fault in the stage 2 loop of a first-row center frontal airbag (J2012 meaning)
  • Internal fault in the airbag module on this loop

Diagnostic Checks Before Replacing Parts

Verify the exact faulty component before ordering replacements.

  1. 1Read stored freeze-frame data and companion codes alongside B0019.
  2. 2Inspect electrical connectors, fuses, and harnesses connected to Center Frontal Airbag.
  3. 3Verify live sensor telemetry before ordering replacement components.

Interactive Symptom Triage

Answer 3 quick checks to narrow down the faulty component before spending money on parts.

Check 1 of 3

Are any companion fault codes stored alongside B0019?

Step-by-Step Troubleshooting & Fix

  1. 1Scan for companion fault codes and address upstream circuit issues first.
  2. 2Visually inspect wiring harnesses, plugs, and hoses around Center Frontal Airbag.
  3. 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
  4. 4Repair damaged wiring or install an OEM-grade replacement Center Frontal Airbag.
  5. 5Clear fault memory and run a verification cycle to confirm B0019 does not return.

Estimated Repair Cost Benchmark

Typical DIY parts and certified technician labor ranges. Select a currency below.

Currency:
Repair PathUSD
DIY Parts Only$30 – $590
Professional Repair (Parts + Labor)$86 – $1,404

Certified Technician Service Checklist

This fault involves sealed safety, gas, or high-voltage systems. Share these details when requesting a repair quote.

  • Share exact brand & fault code: B0019 (Body Control, Airbag & Comfort)
  • Record appliance/boiler serial, model plate, or pressure reading before calling
  • Typical certified technician range: $86 – $1,404

Frequently Asked Questions

Is it safe to keep operating with fault code B0019?

Usually safe for short trips if no severe drivability or safety warnings are active.

How much does it cost to repair B0019?

DIY replacement parts average $30–$590, while professional service averages $86–$1404.

Will resetting B0019 fix the problem permanently?

No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

Related Searches & Questions

B0019 fault code meaningB0019 repair costhow to fix B0019

Manufacturer & Technical Reference

OBD-II Technical Reference (Body Control, Airbag & Comfort)

Related Fault Codes

Auto & OBD-II →
B0019 Fault Code: Center Frontal Stage 2 Deployment Control | FaultCodes.org