FaultCodes.org
P1446NissanPowertrain & Engine ManagementTechnical Reference· Updated: Nov 22, 2026

Nissan P1446 Fault Code: EVAP Canister Vent Control Valve Closed

Nissan P1446 (Powertrain & Engine Management): EVAP Canister Vent Control Valve Closed.

Quick AnswerModerate — Plan Repair

Nissan fault code P1446 indicates EVAP Canister Vent Control Valve Closed. Usually safe for short trips if no severe drivability or safety warnings are active. Typical professional repair costs $130–$594.

Safe to Operate?
Yes (Short Term)
DIY Difficulty
Moderate (Intermediate)
System
Powertrain & Engine Management
Professional Repair
$130 – $594

What This Fault Code Means

Manufacturer-specific Nissan diagnostic trouble code P1446: EVAP Canister Vent Control Valve Closed.

Common Symptoms

  • Warning indicator or active diagnostic code P1446
  • Irregular behavior in Powertrain & Engine Management

Most Likely Root Causes

  • Faulty sensor or actuator in Powertrain & Engine Management
  • Damaged, corroded, or loose wiring harness connector

Diagnostic Checks Before Replacing Parts

Verify the exact faulty component before ordering replacements.

  1. 1Read stored freeze-frame data and companion codes alongside P1446.
  2. 2Inspect electrical connectors, fuses, and harnesses connected to Powertrain & Engine Management.
  3. 3Verify live sensor telemetry before ordering replacement components.

Interactive Symptom Triage

Answer 3 quick checks to narrow down the faulty component before spending money on parts.

Check 1 of 3

Are any companion fault codes stored alongside P1446?

Step-by-Step Troubleshooting & Fix

  1. 1Scan for companion fault codes and address upstream circuit issues first.
  2. 2Visually inspect wiring harnesses, plugs, and hoses around Powertrain & Engine Management.
  3. 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
  4. 4Repair damaged wiring or install an OEM-grade replacement Powertrain & Engine Management.
  5. 5Clear fault memory and run a verification cycle to confirm P1446 does not return.

Estimated Repair Cost Benchmark

Typical DIY parts and certified technician labor ranges. Select a currency below.

Currency:
Repair PathUSD
DIY Parts Only$45 – $249
Professional Repair (Parts + Labor)$130 – $594

Frequently Asked Questions

Is it safe to keep operating with fault code P1446?

Usually safe for short trips if no severe drivability or safety warnings are active.

How much does it cost to repair P1446?

DIY replacement parts average $45–$249, while professional service averages $130–$594.

Will resetting P1446 fix the problem permanently?

No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

Related Searches & Questions

P1446 fault code meaningP1446 repair costhow to fix P1446

Manufacturer & Technical Reference

Nissan Technical Reference (Powertrain & Engine Management)

Related Fault Codes

Auto & OBD-II →
Nissan P1446 Fault Code: EVAP Canister Vent Control Valve Closed | FaultCodes.org