FaultCodes.org
P1138MazdaPowertrain & Engine ManagementTechnical Reference· Updated: Nov 22, 2026

Mazda P1138 Fault Code: HO2S Bank 1 Sensor 2 Signal Above 0.45v AF Ratio Too Rich

Mazda P1138 (Powertrain & Engine Management): HO2S Bank 1 Sensor 2 Signal Above 0.45v AF Ratio Too Rich.

Quick AnswerModerate — Plan Repair

Mazda fault code P1138 indicates HO2S Bank 1 Sensor 2 Signal Above 0.45v AF Ratio Too Rich. Usually safe for short trips if no severe drivability or safety warnings are active. Typical professional repair costs $130–$594.

Safe to Operate?
Yes (Short Term)
DIY Difficulty
Moderate (Intermediate)
System
Powertrain & Engine Management
Professional Repair
$130 – $594

What This Fault Code Means

Manufacturer-specific Mazda diagnostic trouble code P1138: HO2S Bank 1 Sensor 2 Signal Above 0.45v AF Ratio Too Rich.

Common Symptoms

  • Warning indicator or active diagnostic code P1138
  • Irregular behavior in Powertrain & Engine Management

Most Likely Root Causes

  • Faulty sensor or actuator in Powertrain & Engine Management
  • Damaged, corroded, or loose wiring harness connector

Diagnostic Checks Before Replacing Parts

Verify the exact faulty component before ordering replacements.

  1. 1Read stored freeze-frame data and companion codes alongside P1138.
  2. 2Inspect electrical connectors, fuses, and harnesses connected to Powertrain & Engine Management.
  3. 3Verify live sensor telemetry before ordering replacement components.

Interactive Symptom Triage

Answer 3 quick checks to narrow down the faulty component before spending money on parts.

Check 1 of 3

Are any companion fault codes stored alongside P1138?

Step-by-Step Troubleshooting & Fix

  1. 1Scan for companion fault codes and address upstream circuit issues first.
  2. 2Visually inspect wiring harnesses, plugs, and hoses around Powertrain & Engine Management.
  3. 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
  4. 4Repair damaged wiring or install an OEM-grade replacement Powertrain & Engine Management.
  5. 5Clear fault memory and run a verification cycle to confirm P1138 does not return.

Estimated Repair Cost Benchmark

Typical DIY parts and certified technician labor ranges. Select a currency below.

Currency:
Repair PathUSD
DIY Parts Only$45 – $249
Professional Repair (Parts + Labor)$130 – $594

Frequently Asked Questions

Is it safe to keep operating with fault code P1138?

Usually safe for short trips if no severe drivability or safety warnings are active.

How much does it cost to repair P1138?

DIY replacement parts average $45–$249, while professional service averages $130–$594.

Will resetting P1138 fix the problem permanently?

No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

Related Searches & Questions

P1138 fault code meaningP1138 repair costhow to fix P1138

Manufacturer & Technical Reference

Mazda Technical Reference (Powertrain & Engine Management)

Related Fault Codes

Auto & OBD-II →
Mazda P1138 Fault Code: HO2S Bank 1 Sensor 2 Signal… — Fixes & Cost | FaultCodes.org