FaultCodes.org
P1125GMCPowertrain & Engine ManagementTechnical Reference· Updated: Nov 22, 2026

GMC P1125 Fault Code: Accelerator Pedal Position (APP) System

GMC P1125 (Powertrain & Engine Management): Accelerator Pedal Position (APP) System.

Quick AnswerModerate — Plan Repair

GMC fault code P1125 indicates Accelerator Pedal Position (APP) System. Usually safe for short trips if no severe drivability or safety warnings are active. Typical professional repair costs $130–$594.

Safe to Operate?
Yes (Short Term)
DIY Difficulty
Moderate (Intermediate)
System
Powertrain & Engine Management
Professional Repair
$130 – $594

What This Fault Code Means

Manufacturer-specific GMC diagnostic trouble code P1125: Accelerator Pedal Position (APP) System.

Common Symptoms

  • Warning indicator or active diagnostic code P1125
  • Irregular behavior in Powertrain & Engine Management

Most Likely Root Causes

  • Faulty sensor or actuator in Powertrain & Engine Management
  • Damaged, corroded, or loose wiring harness connector

Diagnostic Checks Before Replacing Parts

Verify the exact faulty component before ordering replacements.

  1. 1Read stored freeze-frame data and companion codes alongside P1125.
  2. 2Inspect electrical connectors, fuses, and harnesses connected to Powertrain & Engine Management.
  3. 3Verify live sensor telemetry before ordering replacement components.

Interactive Symptom Triage

Answer 3 quick checks to narrow down the faulty component before spending money on parts.

Check 1 of 3

Are any companion fault codes stored alongside P1125?

Step-by-Step Troubleshooting & Fix

  1. 1Scan for companion fault codes and address upstream circuit issues first.
  2. 2Visually inspect wiring harnesses, plugs, and hoses around Powertrain & Engine Management.
  3. 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
  4. 4Repair damaged wiring or install an OEM-grade replacement Powertrain & Engine Management.
  5. 5Clear fault memory and run a verification cycle to confirm P1125 does not return.

Estimated Repair Cost Benchmark

Typical DIY parts and certified technician labor ranges. Select a currency below.

Currency:
Repair PathUSD
DIY Parts Only$45 – $249
Professional Repair (Parts + Labor)$130 – $594

Frequently Asked Questions

Is it safe to keep operating with fault code P1125?

Usually safe for short trips if no severe drivability or safety warnings are active.

How much does it cost to repair P1125?

DIY replacement parts average $45–$249, while professional service averages $130–$594.

Will resetting P1125 fix the problem permanently?

No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

Related Searches & Questions

P1125 fault code meaningP1125 repair costhow to fix P1125

Manufacturer & Technical Reference

GMC Technical Reference (Powertrain & Engine Management)

Related Fault Codes

Auto & OBD-II →
GMC P1125 Fault Code: Accelerator Pedal Position (APP) System | FaultCodes.org