FaultCodes.org
P0442DodgeEVAP Emissions ControlTechnical Reference· Updated: Nov 22, 2026

Dodge P0442 Fault Code: Medium EVAP Leak

Dodge P0442 (EVAP Emissions Control): Medium EVAP Leak.

Quick AnswerLow — Minor Issue

Dodge fault code P0442 indicates Medium EVAP Leak. Usually safe for short trips if no severe drivability or safety warnings are active. Typical professional repair costs $43–$346.

Safe to Operate?
Yes (Short Term)
DIY Difficulty
Easy (Basic Tools)
System
EVAP Emissions Control
Professional Repair
$43 – $346

What This Fault Code Means

Manufacturer-specific Dodge diagnostic trouble code P0442: Medium EVAP Leak.

Common Symptoms

  • Warning indicator or active diagnostic code P0442
  • Irregular behavior in EVAP Emissions Control

Most Likely Root Causes

  • Faulty sensor or actuator in EVAP Emissions Control
  • Damaged, corroded, or loose wiring harness connector

Diagnostic Checks Before Replacing Parts

Verify the exact faulty component before ordering replacements.

  1. 1Read stored freeze-frame data and companion codes alongside P0442.
  2. 2Inspect electrical connectors, fuses, and harnesses connected to EVAP Emissions Control.
  3. 3Verify live sensor telemetry before ordering replacement components.

Interactive Symptom Triage

Answer 3 quick checks to narrow down the faulty component before spending money on parts.

Check 1 of 3

Are any companion fault codes stored alongside P0442?

Step-by-Step Troubleshooting & Fix

  1. 1Scan for companion fault codes and address upstream circuit issues first.
  2. 2Visually inspect wiring harnesses, plugs, and hoses around EVAP Emissions Control.
  3. 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
  4. 4Repair damaged wiring or install an OEM-grade replacement EVAP Emissions Control.
  5. 5Clear fault memory and run a verification cycle to confirm P0442 does not return.

Estimated Repair Cost Benchmark

Typical DIY parts and certified technician labor ranges. Select a currency below.

Currency:
Repair PathUSD
DIY Parts Only$16 – $145
Professional Repair (Parts + Labor)$43 – $346

Frequently Asked Questions

Is it safe to keep operating with fault code P0442?

Usually safe for short trips if no severe drivability or safety warnings are active.

How much does it cost to repair P0442?

DIY replacement parts average $16–$145, while professional service averages $43–$346.

Will resetting P0442 fix the problem permanently?

No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

Related Searches & Questions

p0442p0442 code chevyp0442 codep0442 engine codep0442 fordp0442 chevyp0442 toyotap0442 code fordp0442 code chevy silverado 1500p0442 vwp0442 meaningp0442 code meaning

Manufacturer & Technical Reference

Dodge Technical Reference (EVAP Emissions Control)

Related Fault Codes

Auto & OBD-II →
Dodge P0442 Fault Code: Medium EVAP Leak — Causes, Fixes & Cost | FaultCodes.org