FaultCodes.org
P0605AudiPowertrain & Engine ManagementTechnical Reference· Updated: Nov 22, 2026

Audi P0605 Fault Code: Lack of proper voltage and or ground to the PCM, Defective PCM ROM memory module, Defective PCM ground circuit(s), Defective PCM controlled output devices

Audi P0605 (Powertrain & Engine Management): Lack of proper voltage and or ground to the PCM, Defective PCM ROM memory module, Defective PCM ground circuit(s), Defective PCM controlled output devices.

Quick AnswerModerate — Plan Repair

Audi fault code P0605 indicates Lack of proper voltage and or ground to the PCM, Defective PCM ROM memory module, Defective PCM ground circuit(s), Defective PCM controlled output devices. Usually safe for short trips if no severe drivability or safety warnings are active. Typical professional repair costs $130–$594.

Safe to Operate?
Yes (Short Term)
DIY Difficulty
Moderate (Intermediate)
System
Powertrain & Engine Management
Professional Repair
$130 – $594

What This Fault Code Means

Manufacturer-specific Audi diagnostic trouble code P0605: Lack of proper voltage and or ground to the PCM, Defective PCM ROM memory module, Defective PCM ground circuit(s), Defective PCM controlled output devices.

Common Symptoms

  • Warning indicator or active diagnostic code P0605
  • Irregular behavior in Powertrain & Engine Management

Most Likely Root Causes

  • Faulty sensor or actuator in Powertrain & Engine Management
  • Damaged, corroded, or loose wiring harness connector

Diagnostic Checks Before Replacing Parts

Verify the exact faulty component before ordering replacements.

  1. 1Read stored freeze-frame data and companion codes alongside P0605.
  2. 2Inspect electrical connectors, fuses, and harnesses connected to Powertrain & Engine Management.
  3. 3Verify live sensor telemetry before ordering replacement components.

Interactive Symptom Triage

Answer 3 quick checks to narrow down the faulty component before spending money on parts.

Check 1 of 3

Are any companion fault codes stored alongside P0605?

Step-by-Step Troubleshooting & Fix

  1. 1Scan for companion fault codes and address upstream circuit issues first.
  2. 2Visually inspect wiring harnesses, plugs, and hoses around Powertrain & Engine Management.
  3. 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
  4. 4Repair damaged wiring or install an OEM-grade replacement Powertrain & Engine Management.
  5. 5Clear fault memory and run a verification cycle to confirm P0605 does not return.

Estimated Repair Cost Benchmark

Typical DIY parts and certified technician labor ranges. Select a currency below.

Currency:
Repair PathUSD
DIY Parts Only$45 – $249
Professional Repair (Parts + Labor)$130 – $594

Frequently Asked Questions

Is it safe to keep operating with fault code P0605?

Usually safe for short trips if no severe drivability or safety warnings are active.

How much does it cost to repair P0605?

DIY replacement parts average $45–$249, while professional service averages $130–$594.

Will resetting P0605 fix the problem permanently?

No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

Related Searches & Questions

P0605 fault code meaningP0605 repair costhow to fix P0605

Manufacturer & Technical Reference

Audi Technical Reference (Powertrain & Engine Management)

Related Fault Codes

Auto & OBD-II →
Audi P0605 Fault Code: Lack of proper voltage and… — Fixes & Cost | FaultCodes.org