FaultCodes.org
P0440AudiEVAP Emissions ControlTechnical Reference· Updated: Nov 22, 2026

Audi P0440 Fault Code: Missing fuel cap, Defective or damaged fuel cap, Distorted or damaged Fuel Tank Filler Neck, Torn or punctured Evaporative system hose(s), Defective Fuel Tank Sending Unit gasket or seal, Split or damaged Carbon Canister, Defective Evaporative Vent Valve and or Evaporative Purge Valve, Defective or damaged fuel tank

Audi P0440 (EVAP Emissions Control): Missing fuel cap, Defective or damaged fuel cap, Distorted or damaged Fuel Tank Filler Neck, Torn or punctured Evaporative system hose(s), Defective Fuel Tank Sending Unit gasket or seal, Split or damaged Carbon Canister, Defective Evaporative Vent Valve and or Evaporative Purge Valve, Defective or damaged fuel tank.

Quick AnswerLow — Minor Issue

Audi fault code P0440 indicates Missing fuel cap, Defective or damaged fuel cap, Distorted or damaged Fuel Tank Filler Neck, Torn or punctured Evaporative system hose(s), Defective Fuel Tank Sending Unit gasket or seal, Split or damaged Carbon Canister, Defective Evaporative Vent Valve and or Evaporative Purge Valve, Defective or damaged fuel tank. Usually safe for short trips if no severe drivability or safety warnings are active. Typical professional repair costs $43–$346.

Safe to Operate?
Yes (Short Term)
DIY Difficulty
Easy (Basic Tools)
System
EVAP Emissions Control
Professional Repair
$43 – $346

What This Fault Code Means

Manufacturer-specific Audi diagnostic trouble code P0440: Missing fuel cap, Defective or damaged fuel cap, Distorted or damaged Fuel Tank Filler Neck, Torn or punctured Evaporative system hose(s), Defective Fuel Tank Sending Unit gasket or seal, Split or damaged Carbon Canister, Defective Evaporative Vent Valve and or Evaporative Purge Valve, Defective or damaged fuel tank.

Common Symptoms

  • Warning indicator or active diagnostic code P0440
  • Irregular behavior in EVAP Emissions Control

Most Likely Root Causes

  • Faulty sensor or actuator in EVAP Emissions Control
  • Damaged, corroded, or loose wiring harness connector

Diagnostic Checks Before Replacing Parts

Verify the exact faulty component before ordering replacements.

  1. 1Read stored freeze-frame data and companion codes alongside P0440.
  2. 2Inspect electrical connectors, fuses, and harnesses connected to EVAP Emissions Control.
  3. 3Verify live sensor telemetry before ordering replacement components.

Interactive Symptom Triage

Answer 3 quick checks to narrow down the faulty component before spending money on parts.

Check 1 of 3

Are any companion fault codes stored alongside P0440?

Step-by-Step Troubleshooting & Fix

  1. 1Scan for companion fault codes and address upstream circuit issues first.
  2. 2Visually inspect wiring harnesses, plugs, and hoses around EVAP Emissions Control.
  3. 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
  4. 4Repair damaged wiring or install an OEM-grade replacement EVAP Emissions Control.
  5. 5Clear fault memory and run a verification cycle to confirm P0440 does not return.

Estimated Repair Cost Benchmark

Typical DIY parts and certified technician labor ranges. Select a currency below.

Currency:
Repair PathUSD
DIY Parts Only$16 – $145
Professional Repair (Parts + Labor)$43 – $346

Frequently Asked Questions

Is it safe to keep operating with fault code P0440?

Usually safe for short trips if no severe drivability or safety warnings are active.

How much does it cost to repair P0440?

DIY replacement parts average $16–$145, while professional service averages $43–$346.

Will resetting P0440 fix the problem permanently?

No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

Related Searches & Questions

P0440 fault code meaningP0440 repair costhow to fix P0440

Manufacturer & Technical Reference

Audi Technical Reference (EVAP Emissions Control)

Related Fault Codes

Auto & OBD-II →
Audi P0440 Fault Code: Missing fuel cap, Defective… — Fixes & Cost | FaultCodes.org