FaultCodes.org
CE-108255-1PlayStation 5Game Engine / GPU CrashVerified Guide· Updated: Nov 22, 2026

PlayStation 5 Error Code CE-108255-1 (Application / Game Crash)

Sony's PS5 application crash error ('An error occurred with the game/application')—triggered by corrupted game/system cache, graphics strain (Ray Tracing / 120Hz / VRR), slow USB drives, or faulty PS5 GPU/RAM hardware when occurring across every title.

Quick AnswerModerate — Plan Repair

PlayStation 5 error CE-108255-1 means 'An error occurred with the game/application,' crashing a game back to the PS5 dashboard. Follow official Sony PlayStation troubleshooting first: update both the game and PS5 system software, boot into Safe Mode (hold Power ~7 seconds until the 2nd beep with a USB-wired DualSense) to run Option 5: Clear Cache and Rebuild Database (preserves all games and saves), and move the game from external USB drives onto the internal NVMe SSD. If crashes hit graphically demanding modes, disable Ray Tracing (use Performance Mode), turn off 120Hz Output / VRR / HDR, or set 4K Video Transfer Rate to -1/-2. Persistent multi-game CE-108255-1 crashes after a factory reset indicate an APU/GPU/RAM hardware fault requiring Sony RMA service ($0 DIY; $0 under warranty, $150–$250 out of warranty).

Safe to Operate?
Yes (Short Term)
DIY Difficulty
Easy (Basic Tools)
System
Game Engine / GPU Crash
Professional Repair
$150 – $250

What This Fault Code Means

Sony classifies CE-108255-1 as an unhandled runtime exception in a PS5 application or game process. Isolated single-game crashes usually stem from unpatched game shaders, corrupted SSD file blocks, or HDMI 2.1/120Hz display mode handshakes; however, when CE-108255-1 crashes multiple unrelated PS5 native games immediately at launch, GPU or GDDR6 unified memory defects are the standard root cause.

Common Symptoms

  • Game freezes mid-play or at title screen and exits back to the PS5 home screen with popup CE-108255-1
  • Visual artifacts, flickering polygons, or crashes concentrated specifically in Ray Tracing / 120Hz modes
  • Happens either in one specific buggy game or across nearly all PS5 titles (hardware indicator)

Most Likely Root Causes

  • Corrupted game patch files, shader cache, or fragmented PS5 system database
  • GPU instability or display-pipeline errors triggered by Ray Tracing, 120Hz, VRR, or 4K chroma bandwidth
  • Game running from an aging external USB HDD or overheating console vents clogged with dust
  • Failing internal custom RDNA2 GPU / unified GDDR6 memory chip (if multi-game crashes survive Safe Mode Reset)

Technical Thresholds & Specifications

Parameter / ConditionFactory Spec / Threshold
Official Sony Definition

Application/GPU runtime abort returning user to PS5 home dashboard

An error occurred with the game/application
Safe Mode Entry Timing

DualSense controller must be connected via USB data cable

Hold Power ~7 seconds until 2nd beep
Primary Safe Software Fix

Preserves all installed games and savedata; clean re-index

Option 5: Clear Cache & Rebuild Database
Known Display / GPU Overrides

Frequently resolves dashboard crashes in graphics-intensive titles

Disable Ray Tracing, 120Hz, VRR, HDR; 4K Rate -1/-2

Commonly Affected Models & Service Bulletins

  • PlayStation 5 Standard & Digital Editions (including early CFI-1000 / CFI-1100 / CFI-1200 units)
  • PlayStation 5 Slim & PS5 Pro running Ray Tracing / 120Hz VRR graphics modes
  • Consoles running PS5/PS4 titles off slow external USB HDDs instead of internal NVMe SSD

Diagnostic Checks Before Replacing Parts

Verify the exact faulty component before ordering replacements.

  1. 1Isolate 1 game vs. ALL games: Check whether CE-108255-1 occurs inside a single specific game or across multiple PS5 native games (multi-game native PS5 crashes strongly suspect APU/GPU hardware).
  2. 2Move the crashing game directly onto Console Storage (internal SSD) if installed on USB Extended Storage, and switch in-game Graphics from Fidelity / Ray Tracing to Performance Mode.
  3. 3Clean dust vents carefully and note whether turning off 120Hz Output, VRR, and HDR under Screen and Video eliminates dashboard exits.

Interactive Symptom Triage

Answer 3 quick checks to narrow down the faulty component before spending money on parts.

Check 1 of 3

Does CE-108255-1 crash ONLY ONE specific game while other demanding PS5 games run stably?

Step-by-Step Troubleshooting & Fix

Tools & Parts Reference

USB-C data cable (required for DualSense controller in Safe Mode)PlayStation Plus cloud or USB drive (to back up saves before Option 6/7 reset)FAT32 / exFAT USB flash drive (only if performing Option 7 full firmware reinstall)
  1. 1Highlight the crashing game -> press Options -> Check for Update, and check Settings -> System -> System Software for latest firmware.
  2. 2Power off PS5 completely, hold Power button for ~7 seconds until the second beep to enter Safe Mode, plug DualSense in via USB-C cable, and select Option 5: Clear Cache and Rebuild Database -> Rebuild Database (does NOT erase saves or installed games).
  3. 3Switch game graphics to Performance Mode (Ray Tracing OFF); in PS5 Settings -> Screen and Video -> Video Output, test disabling 120Hz Output, VRR, HDR, or adjusting 4K Video Transfer Rate to -1 or -2.
  4. 4If CE-108255-1 still persists across multiple native PS5 games, back up saves to PS+ Cloud or USB, delete/reinstall the game—or test Safe Mode Option 6/7 Reset; if multi-game crashes continue, contact PlayStation Support for warranty repair/replacement.

Estimated Repair Cost Benchmark

Typical DIY parts and certified technician labor ranges. Select a currency below.

Currency:
Repair PathUSD
DIY Parts Only$0
Professional Repair (Parts + Labor)$150 – $250

Recommended Diagnostic Tools & Replacement Parts

Check OEM specifications and compatible tools for this repair.

Frequently Asked Questions

Will Safe Mode Option 5 (Clear Cache and Rebuild Database) delete my PS5 games or save files?

No. Option 5 preserves all installed games, profiles, and save files—it safely cleans cached files and re-indexes the database. Only Option 6 / Option 7 (Reset PS5) wipes console storage, so always back up saves first before resetting.

When does PS5 error CE-108255-1 indicate a hardware defect?

If CE-108255-1 crashes multiple native PS5 games right at startup or during standard gameplay even after rebuilding the database, toggling off Ray Tracing/120Hz, and performing a full USB OS reinstallation, it typically signals faulty GPU/GDDR6 hardware needing Sony warranty/service replacement.

Related Searches & Questions

PS5 CE-108255-1 fixCE-108255-1 ray tracing 120Hz crashPS5 safe mode option 5 rebuild databaseis CE-108255-1 a hardware defect

Verified Official & Engineering References

Plain Text / AI View

Related Fault Codes

Tech & OS →
PlayStation 5 Error Code CE-108255-1 (Application / Game Crash) | FaultCodes.org