# OBD-II U0046: Vehicle Communication Bus C

> **Quick Answer:** OBD-II fault code U0046 indicates Vehicle Communication Bus C. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $54–$972.

- **URL:** https://faultcodes.org/automotive/obd2-u0046
- **Category:** Automotive & OBD-II
- **Brand / Standard:** OBD-II
- **System Area:** CAN Bus & Network Communication
- **Severity:** High — Service Soon
- **Safe to Operate?:** No — Risk of Damage
- **DIY Difficulty:** Professional Recommended
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
U0046 covers Vehicle Communication Bus C in general, the third manufacturer-assigned network slot after Bus A and Bus B. Public uses are rare. Stellantis lists U0046-00 among the faults addressed by powertrain control module flash 18-071-26 for the 2025 Ram 1500 with the 3.0-litre Hurricane twin-turbo six; the bulletin pairs its long code list with a possible MIL but does not single out the bus fault as the reason for the lamp. Ford's 2014 Boss 302S code table names U0046 as well, without marking it as a MIL code. Behind the code there may be a wiring fault, a module that stops talking or plain software, so check for accompanying lost-communication codes first, then supply, ground and bus wiring of the modules on that network before replacing parts.

## Common Symptoms
- Check-engine lamp possible together with other stored codes (Ram 1500)
- Functions of modules on Bus C unavailable
- Lost-communication codes stored alongside

## Most Likely Root Causes
- Control module software that misjudges the bus (Ram 1500: PCM flash)
- Damaged bus wiring or poorly seated connector on Bus C
- Supply or ground fault at a module on Bus C

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around Bus C Wiring.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement Bus C Wiring.
5. Clear fault memory and run a verification cycle to confirm U0046 does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $19–$408 | $54–$972 |
| GBP | £15–£321 | £43–£774 |
| CAD | CA$26–CA$548 | CA$73–CA$1305 |
| EUR | €18–€378 | €50–€900 |
| CHF | CHF 21–CHF 435 | CHF 66–CHF 1188 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code U0046?
Avoid prolonged operation until inspected to prevent secondary component damage.

### How much does it cost to repair U0046?
DIY replacement parts average $19–$408, while professional service averages $54–$972.

### Will resetting U0046 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

