# OBD-II U0036: Vehicle Communication Bus A (-) Shorted to Bus A (+)

> **Quick Answer:** OBD-II fault code U0036 indicates Vehicle Communication Bus A (-) Shorted to Bus A (+). Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $86–$1080.

- **URL:** https://faultcodes.org/automotive/obd2-u0036
- **Category:** Automotive & OBD-II
- **Brand / Standard:** OBD-II
- **System Area:** CAN Bus & Network Communication
- **Severity:** High — Service Soon
- **Safe to Operate?:** No — Risk of Damage
- **DIY Difficulty:** Professional Recommended
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
U0036 describes a short between the (+) and (-) wires of Vehicle Communication Bus A. On a CAN-type bus the differential voltage then stays at zero, receivers see only recessive bits and, as onsemi's measurements on high-speed CAN show, no frame can be sent any more; NXP adds that transceiver diagnosis cannot detect this short. Audi documents U003600 under exactly its J2012 name for the 2018-21 Q5 plug-in hybrid: together with U002800, U002900 and drive-motor and power-electronics codes it appears when the 12 V harness of the power electronics chafes against the underbody trim, with warning lamps and in some cases a car that cannot be driven. The fix is repairing the wires and rerouting the harness. With the battery off, near zero ohms between the bus wires confirms the short.

## Common Symptoms
- Several warning lamps on at once
- Vehicle may refuse to drive (Audi Q5 PHEV)
- Drive-motor and power-electronics codes stored alongside

## Most Likely Root Causes
- Harness chafed so that both bus wires touch (Audi Q5 PHEV: underbody trim)
- Water in a splice or connector bridging the two wires
- Damaged transceiver shorting its bus pins

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around Bus A Wiring.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement Bus A Wiring.
5. Clear fault memory and run a verification cycle to confirm U0036 does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $30–$454 | $86–$1080 |
| GBP | £24–£357 | £69–£860 |
| CAD | CA$41–CA$609 | CA$116–CA$1450 |
| EUR | €28–€420 | €80–€1000 |
| CHF | CHF 32–CHF 483 | CHF 106–CHF 1320 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code U0036?
Avoid prolonged operation until inspected to prevent secondary component damage.

### How much does it cost to repair U0036?
DIY replacement parts average $30–$454, while professional service averages $86–$1080.

### Will resetting U0036 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

