# OBD-II U0035: Vehicle Communication Bus A (-) High

> **Quick Answer:** OBD-II fault code U0035 indicates Vehicle Communication Bus A (-) High. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $65–$864.

- **URL:** https://faultcodes.org/automotive/obd2-u0035
- **Category:** Automotive & OBD-II
- **Brand / Standard:** OBD-II
- **System Area:** CAN Bus & Network Communication
- **Severity:** High — Service Soon
- **Safe to Operate?:** No — Risk of Damage
- **DIY Difficulty:** Professional Recommended
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
U0035 means the (-) wire of Vehicle Communication Bus A is held too high, typically shorted to battery voltage. On a two-wire high-speed-type CAN, such as Audi's sensor/hybrid CAN filed under Bus A, this is CAN-Low. onsemi's tests place CAN-Low at 12 V among the shorts that make transmission impossible: frames can no longer be sent and the controllers repeat them without success. All modules on Bus A drop out together, and units on other networks register their absence. This is the opposite of U0034, where traffic survives. No manufacturer documents U0035 publicly. Measuring CAN-Low against ground with ignition on shows battery voltage instead of roughly 1.5 to 2.5 V; chafing against a supply wire or a water-filled connector are the usual reasons.

## Common Symptoms
- All functions on Bus A fail together
- Lost-communication codes in modules on other networks
- Warning lamps or fallback modes depending on the modules involved

## Most Likely Root Causes
- (-) wire chafed against a battery or ignition feed
- Water in a connector linking the (-) wire to a supply pin
- Damaged transceiver driving the (-) line high

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around Bus A Wiring.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement Bus A Wiring.
5. Clear fault memory and run a verification cycle to confirm U0035 does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $23–$363 | $65–$864 |
| GBP | £18–£286 | £52–£688 |
| CAD | CA$30–CA$487 | CA$87–CA$1160 |
| EUR | €21–€336 | €60–€800 |
| CHF | CHF 24–CHF 386 | CHF 79–CHF 1056 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code U0035?
Avoid prolonged operation until inspected to prevent secondary component damage.

### How much does it cost to repair U0035?
DIY replacement parts average $23–$363, while professional service averages $65–$864.

### Will resetting U0035 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

