# OBD-II U0033: Vehicle Communication Bus A (-) Open

> **Quick Answer:** OBD-II fault code U0033 indicates Vehicle Communication Bus A (-) Open. Usually safe for short trips if no severe drivability or safety warnings are active. Typical professional repair costs $65–$756.

- **URL:** https://faultcodes.org/automotive/obd2-u0033
- **Category:** Automotive & OBD-II
- **Brand / Standard:** OBD-II
- **System Area:** CAN Bus & Network Communication
- **Severity:** Moderate — Plan Repair
- **Safe to Operate?:** Yes (Short Term)
- **DIY Difficulty:** Professional Recommended
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
U0033 reports an interruption of the (-) wire of Vehicle Communication Bus A; on a dual-line CAN like the sensor/hybrid CAN Audi lists as Bus A, that is CAN-Low. As with U0030, the network falls apart into pieces that can no longer hear each other, and NXP stresses that a standard high-speed transceiver has no means of detecting an open wire on its own. The control module infers the fault indirectly, for example from expected messages that stop arriving or from rising error counters, so the code often appears next to lost-communication entries for modules beyond the break. No manufacturer documents U0033 publicly. With the battery disconnected, a resistance between (+) and (-) that differs from the normal termination value hints at the break; check recently separated connectors first.

## Common Symptoms
- Modules beyond the break stop responding
- Lost-communication codes stored alongside

## Most Likely Root Causes
- (-) wire of Bus A broken in the harness
- Pushed-back or corroded terminal in a connector
- Connector not reconnected after a repair

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around Bus A Wiring.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement Bus A Wiring.
5. Clear fault memory and run a verification cycle to confirm U0033 does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $23–$318 | $65–$756 |
| GBP | £18–£250 | £52–£602 |
| CAD | CA$30–CA$426 | CA$87–CA$1015 |
| EUR | €21–€294 | €60–€700 |
| CHF | CHF 24–CHF 338 | CHF 79–CHF 924 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code U0033?
Usually safe for short trips if no severe drivability or safety warnings are active.

### How much does it cost to repair U0033?
DIY replacement parts average $23–$318, while professional service averages $65–$756.

### Will resetting U0033 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

