# OBD-II U0021: Low Speed CAN Communication Bus (+) Open

> **Quick Answer:** OBD-II fault code U0021 indicates Low Speed CAN Communication Bus (+) Open. Usually safe for short trips if no severe drivability or safety warnings are active. Typical professional repair costs $54–$540.

- **URL:** https://faultcodes.org/automotive/obd2-u0021
- **Category:** Automotive & OBD-II
- **Brand / Standard:** OBD-II
- **System Area:** CAN Bus & Network Communication
- **Severity:** Moderate — Plan Repair
- **Safe to Operate?:** Yes (Short Term)
- **DIY Difficulty:** Moderate (Intermediate)
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
U0021 marks a break in the (+) wire of a two-wire low-speed CAN, called CAN-High in the fault-tolerant layout of ISO 11898-3. There the wire rests close to 0 V and is pulled toward 5 V for a dominant bit, the reverse of the high-speed pattern. NXP's TJA1055 treats an interrupted CAN-High as failure 1: drivers, termination and differential reception stay unchanged, and its error pin only reacts when the gap lies between sender and receiver, so it toggles rather than staying low. Communication therefore usually continues and the code mainly records lost redundancy. GM's low-speed GMLAN uses one wire only, so a (+)/(-) split does not apply there. No manufacturer documents U0021 publicly; CARB merely demands that missing communication of digital inputs be detected and coded separately.

## Common Symptoms
- Usually no noticeable effect, the bus keeps running
- Occasional comfort function glitches, especially with interference
- Code stored only in modules on one side of the break

## Most Likely Root Causes
- CAN-High wire broken at a flex point such as a door transition
- Pushed-back or spread terminal in a connector
- Corrosion in a connector or splice

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around Low Speed Can Wiring.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement Low Speed Can Wiring.
5. Clear fault memory and run a verification cycle to confirm U0021 does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $19–$227 | $54–$540 |
| GBP | £15–£179 | £43–£430 |
| CAD | CA$26–CA$305 | CA$73–CA$725 |
| EUR | €18–€210 | €50–€500 |
| CHF | CHF 21–CHF 241 | CHF 66–CHF 660 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code U0021?
Usually safe for short trips if no severe drivability or safety warnings are active.

### How much does it cost to repair U0021?
DIY replacement parts average $19–$227, while professional service averages $54–$540.

### Will resetting U0021 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

