# OBD-II U0020: Low Speed CAN Communication Bus Performance

> **Quick Answer:** OBD-II fault code U0020 indicates Low Speed CAN Communication Bus Performance. Usually safe for short trips if no severe drivability or safety warnings are active. Typical professional repair costs $43–$432.

- **URL:** https://faultcodes.org/automotive/obd2-u0020
- **Category:** Automotive & OBD-II
- **Brand / Standard:** OBD-II
- **System Area:** CAN Bus & Network Communication
- **Severity:** Moderate — Plan Repair
- **Safe to Operate?:** Yes (Short Term)
- **DIY Difficulty:** Moderate (Intermediate)
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
U0020 reports a low-speed CAN that still runs but delivers its traffic unreliably. GM documents it for the 2011 Saab 9-5, whose low-speed GMLAN is a single wire: a module sets U0020 when a monitored cyclic message, which doubles as proof that the sender is available, fails to arrive, and then substitutes a default value. Saab adds that some modules store it when the bus wakes up or the supply returns before they have learned which partners are present; diagnosis follows the symptoms or the U0100-U02FF codes. GM told technicians to ignore a current U0020 in the video processing module of 2019 Silverado/Sierra trucks as a software artefact, and lists it for 2017 trucks whose gateway module hangs until its fuse is pulled. Unlike U0019 the bus itself is usually intact.

## Common Symptoms
- Often no noticeable symptom, code found during a scan
- Sporadic dropouts of comfort or display functions
- Several modules store communication codes at the same time

## Most Likely Root Causes
- Code stored while modules wake up or after the supply was interrupted
- Software anomaly in one module (GM video processing module 2019)
- Gateway module stops communicating or has loose terminals
- Intermittent contact in the low-speed bus wiring

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around Low Speed Can Wiring.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement Low Speed Can Wiring.
5. Clear fault memory and run a verification cycle to confirm U0020 does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $16–$181 | $43–$432 |
| GBP | £13–£143 | £34–£344 |
| CAD | CA$22–CA$244 | CA$58–CA$580 |
| EUR | €15–€168 | €40–€400 |
| CHF | CHF 17–CHF 193 | CHF 53–CHF 528 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code U0020?
Usually safe for short trips if no severe drivability or safety warnings are active.

### How much does it cost to repair U0020?
DIY replacement parts average $16–$181, while professional service averages $43–$432.

### Will resetting U0020 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

