# OBD-II U0019: Low Speed CAN Communication Bus

> **Quick Answer:** OBD-II fault code U0019 indicates Low Speed CAN Communication Bus. Usually safe for short trips if no severe drivability or safety warnings are active. Typical professional repair costs $65–$972.

- **URL:** https://faultcodes.org/automotive/obd2-u0019
- **Category:** Automotive & OBD-II
- **Brand / Standard:** OBD-II
- **System Area:** CAN Bus & Network Communication
- **Severity:** Moderate — Plan Repair
- **Safe to Operate?:** Yes (Short Term)
- **DIY Difficulty:** Professional Recommended
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
U0019 is the general fault slot for the low-speed CAN, the slow body network serving doors, lighting, locks and comfort electronics. Two physical forms exist: the two-wire fault-tolerant CAN of ISO 11898-3, which NXP's TJA1055 runs at up to 125 kBd and keeps alive on one wire after a single break or short, and the one-conductor low-speed GMLAN that GM runs at 33.33 kbit/s. FCA names U0019 CAN B Bus; on the 2015 Ram ProMaster the BCM logged U0019-01 (general electrical failure) with a lit MIL, cured by a BCM reflash under bulletin 08-230-22. Mercedes-Benz lists U001988 among the codes behind false anti-theft alarms in 2019-25 models and has supply, ground and CAN lines to the overhead panel checked. Comfort functions suffer rather than driveability.

## Common Symptoms
- Comfort functions such as locks, lighting or windows fail or act erratically
- Anti-theft alarm triggers without obvious reason
- Lost-communication codes for several body modules
- MIL on in some vehicles (FCA ProMaster 2015)

## Most Likely Root Causes
- Damaged low-speed bus wiring or corroded, loose connector pins
- Poor supply or ground at a module on the body bus
- Module software logging the code without a real fault (FCA ProMaster BCM)
- Faulty module or transceiver disturbing the low-speed bus

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around Low Speed Can Wiring.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement Low Speed Can Wiring.
5. Clear fault memory and run a verification cycle to confirm U0019 does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $23–$408 | $65–$972 |
| GBP | £18–£321 | £52–£774 |
| CAD | CA$30–CA$548 | CA$87–CA$1305 |
| EUR | €21–€378 | €60–€900 |
| CHF | CHF 24–CHF 435 | CHF 79–CHF 1188 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code U0019?
Usually safe for short trips if no severe drivability or safety warnings are active.

### How much does it cost to repair U0019?
DIY replacement parts average $23–$408, while professional service averages $65–$972.

### Will resetting U0019 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

