# OBD-II U0016: Medium Speed CAN Communication Bus (-) Low

> **Quick Answer:** OBD-II fault code U0016 indicates Medium Speed CAN Communication Bus (-) Low. Usually safe for short trips if no severe drivability or safety warnings are active. Typical professional repair costs $54–$648.

- **URL:** https://faultcodes.org/automotive/obd2-u0016
- **Category:** Automotive & OBD-II
- **Brand / Standard:** OBD-II
- **System Area:** CAN Bus & Network Communication
- **Severity:** Moderate — Plan Repair
- **Safe to Operate?:** Yes (Short Term)
- **DIY Difficulty:** Moderate (Intermediate)
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
U0016 reports CAN-Low of the medium-speed bus, the (-) wire, sitting below its valid range, typically through a short to ground. Transferred from the high-speed physical layer, which Saab's two-wire terminated mid-speed GMLAN resembles, this is a fault the bus tolerates: onsemi measured continuing transmission with deformed levels, and NXP files it as a hidden failure visible only to transceivers with diagnosis. The comfort network therefore usually keeps working, but becomes more sensitive to interference; drivers rarely notice anything beyond sporadic glitches. No manufacturer documents U0016 publicly. Because the fault hides so well, the code itself is often the only clue; measure CAN-Low against ground with the battery disconnected and follow the harness near sharp edges.

## Common Symptoms
- Usually no lasting malfunction, code found during a scan
- Sporadic glitches in comfort functions

## Most Likely Root Causes
- Medium-speed CAN-Low chafed against a ground point or sheet edge
- Water ingress in a footwell or door connector
- Comfort module transceiver internally shorted on CAN-Low

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around Can Low Wire.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement Can Low Wire.
5. Clear fault memory and run a verification cycle to confirm U0016 does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $19–$272 | $54–$648 |
| GBP | £15–£214 | £43–£516 |
| CAD | CA$26–CA$365 | CA$73–CA$870 |
| EUR | €18–€252 | €50–€600 |
| CHF | CHF 21–CHF 290 | CHF 66–CHF 792 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code U0016?
Usually safe for short trips if no severe drivability or safety warnings are active.

### How much does it cost to repair U0016?
DIY replacement parts average $19–$272, while professional service averages $54–$648.

### Will resetting U0016 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

