# OBD-II U0014: Medium Speed CAN Communication Bus (+) High

> **Quick Answer:** OBD-II fault code U0014 indicates Medium Speed CAN Communication Bus (+) High. Usually safe for short trips if no severe drivability or safety warnings are active. Typical professional repair costs $54–$648.

- **URL:** https://faultcodes.org/automotive/obd2-u0014
- **Category:** Automotive & OBD-II
- **Brand / Standard:** OBD-II
- **System Area:** CAN Bus & Network Communication
- **Severity:** Moderate — Plan Repair
- **Safe to Operate?:** Yes (Short Term)
- **DIY Difficulty:** Moderate (Intermediate)
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
U0014 means CAN-High of the medium-speed bus lies above its normal range, most often because the (+) wire touches battery voltage. On a differential CAN of the high-speed type this is a fault the network rides through: onsemi and NXP found frames still being delivered, but with shifted levels, reduced noise margin and higher current draw in the transceivers. NXP calls such a short hidden because only transceivers with built-in diagnosis notice it. On the comfort bus the result tends to be subtle: an occasional unresponsive switch, a flickering display or a stored code without complaint. No manufacturer documents U0014 publicly, and Saab's description shows only the two-wire terminated layout that makes this analogy plausible. A CAN-High reading close to battery voltage with ignition on confirms the short.

## Common Symptoms
- Occasional unresponsive switches or flickering displays
- Stored code without obvious malfunction

## Most Likely Root Causes
- Medium-speed CAN-High rubbing against a supply wire
- Moisture in a door or roof connector linking CAN-High to plus
- Aftermarket device wired to the comfort bus incorrectly

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around Can High Wire.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement Can High Wire.
5. Clear fault memory and run a verification cycle to confirm U0014 does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $19–$272 | $54–$648 |
| GBP | £15–£214 | £43–£516 |
| CAD | CA$26–CA$365 | CA$73–CA$870 |
| EUR | €18–€252 | €50–€600 |
| CHF | CHF 21–CHF 290 | CHF 66–CHF 792 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code U0014?
Usually safe for short trips if no severe drivability or safety warnings are active.

### How much does it cost to repair U0014?
DIY replacement parts average $19–$272, while professional service averages $54–$648.

### Will resetting U0014 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

