# OBD-II U0011: Medium Speed CAN Communication Bus Performance

> **Quick Answer:** OBD-II fault code U0011 indicates Medium Speed CAN Communication Bus Performance. Usually safe for short trips if no severe drivability or safety warnings are active. Typical professional repair costs $54–$756.

- **URL:** https://faultcodes.org/automotive/obd2-u0011
- **Category:** Automotive & OBD-II
- **Brand / Standard:** OBD-II
- **System Area:** CAN Bus & Network Communication
- **Severity:** Moderate — Plan Repair
- **Safe to Operate?:** Yes (Short Term)
- **DIY Difficulty:** Moderate (Intermediate)
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
U0011 says the medium-speed CAN is running but not dependably: expected periodic messages come late or not at all, error frames accumulate, or a node briefly goes bus-off and rejoins. No manufacturer publicly documents U0011 in its J2012 sense with thresholds. The nearest model is GM's high-speed counterpart U0002, where a supervised message missing for more than 250 ms sets the code. Alfa Romeo even assigns the number to something else: in the Giulia and Stelvio drive style control module, U0011-14 and U0011-15 mark a faulty down circuit of the DNA rotary selector. Typical causes are loose or corroded connectors, water ingress, voltage dips during cranking and module software. Body and comfort functions then work only intermittently while the car itself drives normally.

## Common Symptoms
- Comfort functions such as windows, locks or climate controls work intermittently
- Code stored as history in body modules

## Most Likely Root Causes
- Loose or corroded connector on the medium-speed pair
- Low battery voltage or poor ground causing module resets
- Module software miscounting or missing messages (update needed)

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around Can Bus Wiring.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement Can Bus Wiring.
5. Clear fault memory and run a verification cycle to confirm U0011 does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $19–$318 | $54–$756 |
| GBP | £15–£250 | £43–£602 |
| CAD | CA$26–CA$426 | CA$73–CA$1015 |
| EUR | €18–€294 | €50–€700 |
| CHF | CHF 21–CHF 338 | CHF 66–CHF 924 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code U0011?
Usually safe for short trips if no severe drivability or safety warnings are active.

### How much does it cost to repair U0011?
DIY replacement parts average $19–$318, while professional service averages $54–$756.

### Will resetting U0011 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

