# OBD-II P0728: Engine Speed Input Circuit Intermittent

> **Quick Answer:** OBD-II fault code P0728 indicates Engine Speed Input Circuit Intermittent. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $54–$324.

- **URL:** https://faultcodes.org/automotive/obd2-p0728
- **Category:** Automotive & OBD-II
- **Brand / Standard:** OBD-II
- **System Area:** Transmission & Drivetrain
- **Severity:** High — Service Soon
- **Safe to Operate?:** No — Risk of Damage
- **DIY Difficulty:** Moderate (Intermediate)
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
The transmission module needs engine speed for converter slip, shift quality and to check the turbine speed. Today it almost always arrives over CAN from the engine module with a validity flag; only GM's 2007 Allison 1000 tables show a separate engine speed sensor read by the transmission module. P0728 means the engine speed signal at the transmission module drops out briefly. No manufacturer document available to us uses this code: GM's Allison 1000 detects jumps and noise of this input under P0726/P0727, and Saab's bus-based systems use those codes, too. By analogy with P0718/P0723 dropouts are counted. A loose contact in the signal or CAN circuit or an intermittent crankshaft sensor fault in the engine module is the likely cause; shifts may be harsh at times.

## Common Symptoms
- Occasional transmission warning lamp
- Harsh shift now and then
- Converter clutch releases occasionally

## Most Likely Root Causes
- Loose contact in signal or CAN circuit
- Sensor (if fitted) dirty or loose
- Intermittent crankshaft sensor fault in the engine module
- Transmission module

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around Engine Speed Signal.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement Engine Speed Signal.
5. Clear fault memory and run a verification cycle to confirm P0728 does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $19–$136 | $54–$324 |
| GBP | £15–£107 | £43–£258 |
| CAD | CA$26–CA$183 | CA$73–CA$435 |
| EUR | €18–€126 | €50–€300 |
| CHF | CHF 21–CHF 145 | CHF 66–CHF 396 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code P0728?
Avoid prolonged operation until inspected to prevent secondary component damage.

### How much does it cost to repair P0728?
DIY replacement parts average $19–$136, while professional service averages $54–$324.

### Will resetting P0728 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

