# OBD-II P0726: Engine Speed Input Circuit Range/Performance

> **Quick Answer:** OBD-II fault code P0726 indicates Engine Speed Input Circuit Range/Performance. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $65–$432.

- **URL:** https://faultcodes.org/automotive/obd2-p0726
- **Category:** Automotive & OBD-II
- **Brand / Standard:** OBD-II
- **System Area:** Transmission & Drivetrain
- **Severity:** High — Service Soon
- **Safe to Operate?:** No — Risk of Damage
- **DIY Difficulty:** Moderate (Intermediate)
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
The transmission module needs engine speed for converter slip, shift quality and to check the turbine speed. Today it almost always arrives over CAN from the engine module with a validity flag; only GM's 2007 Allison 1000 tables show a separate engine speed sensor read by the transmission module. P0726 means the engine speed value is present but implausible. The Allison 1000, which reads its own sensor, flags a jump of 600 rpm within 0.15 s or noise of ±650 rpm, with the engine above 600 rpm and a gear engaged, after two trips. Saab's 9-3 of 2000, which receives the value over the bus, flags more than 7200 rpm for at least 10 s. The converter clutch is then locked out and shifts may be harsh. No signal at all is P0727.

## Common Symptoms
- Transmission warning lamp, possibly check engine light
- Torque converter clutch locked out
- Harsh shifts or limp mode
- Often an engine code (crankshaft sensor) as well

## Most Likely Root Causes
- Engine speed sensor at the transmission (Allison) dirty or faulty, loose contact
- Interference (shielding, ground)
- Wrong bus value from the engine module (crankshaft sensor problem)
- Transmission module

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around Engine Speed Signal.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement Engine Speed Signal.
5. Clear fault memory and run a verification cycle to confirm P0726 does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $23–$181 | $65–$432 |
| GBP | £18–£143 | £52–£344 |
| CAD | CA$30–CA$244 | CA$87–CA$580 |
| EUR | €21–€168 | €60–€400 |
| CHF | CHF 24–CHF 193 | CHF 79–CHF 528 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code P0726?
Avoid prolonged operation until inspected to prevent secondary component damage.

### How much does it cost to repair P0726?
DIY replacement parts average $23–$181, while professional service averages $65–$432.

### Will resetting P0726 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

