# OBD-II P0721: Output Shaft Speed Sensor Circuit Range/Performance

> **Quick Answer:** OBD-II fault code P0721 indicates Output Shaft Speed Sensor Circuit Range/Performance. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $86–$486.

- **URL:** https://faultcodes.org/automotive/obd2-p0721
- **Category:** Automotive & OBD-II
- **Brand / Standard:** OBD-II
- **System Area:** Transmission & Drivetrain
- **Severity:** High — Service Soon
- **Safe to Operate?:** No — Risk of Damage
- **DIY Difficulty:** Moderate (Intermediate)
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
The output shaft speed sensor (Hall or inductive) reports the speed of the transmission output; it gives the gear ratio together with input speed and on many vehicles also the road speed for speedometer and cruise control. P0721 means the output speed is present but implausible: too high (Ford 6R80 above 7450 rpm), not matching wheel or input speed in the engaged gear (ZF 6HP26 more than 200 or 250 rpm apart, Ford's F21 more than 15 % for 10 s), or jumping (Allison 1000: 500 rpm within 0.15 s). On GM's 10-speed with a direction-sensing sensor, P0721 means the reported direction of rotation does not fit – since 2025 after two trips, earlier after one. Wrong tyre sizes or a faulty wheel speed sensor can also falsify the comparison.

## Common Symptoms
- Speedometer jumps
- Warning lamp
- Wrong shifts, limp mode
- ABS/ESP warning possible if wheel speed is affected

## Most Likely Root Causes
- Output speed sensor faulty or dirty (metal debris)
- Contact problems or interference in the sensor circuit
- Wrong tyre size or axle ratio, faulty wheel speed sensor
- Reluctor wheel damaged or sensor mounted wrongly

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around Output Speed Sensor.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement Output Speed Sensor.
5. Clear fault memory and run a verification cycle to confirm P0721 does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $30–$204 | $86–$486 |
| GBP | £24–£161 | £69–£387 |
| CAD | CA$41–CA$274 | CA$116–CA$653 |
| EUR | €28–€189 | €80–€450 |
| CHF | CHF 32–CHF 217 | CHF 106–CHF 594 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code P0721?
Avoid prolonged operation until inspected to prevent secondary component damage.

### How much does it cost to repair P0721?
DIY replacement parts average $30–$204, while professional service averages $86–$486.

### Will resetting P0721 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

