# OBD-II P0704: Clutch Switch Input Circuit

> **Quick Answer:** OBD-II fault code P0704 indicates Clutch Switch Input Circuit. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $43–$130.

- **URL:** https://faultcodes.org/automotive/obd2-p0704
- **Category:** Automotive & OBD-II
- **Brand / Standard:** OBD-II
- **System Area:** Transmission & Drivetrain
- **Severity:** High — Service Soon
- **Safe to Operate?:** No — Risk of Damage
- **DIY Difficulty:** Easy (Basic Tools)
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
Only on cars with a clutch pedal: the clutch switch tells the engine module that the clutch is depressed, used to cancel cruise control, smooth load changes when shifting and for stop-start. The check is a plausibility test over driving events rather than a voltage check: Saab's Trionic T8 expects a change of state every time the car pulls away from 3 to 50 km/h (four misses in a row), the EDC16 diesel at gear changes (25 in a row, above 35 km/h and 1500 rpm), and Ford compares its two clutch switches continuously. None of them lights the check engine light; cruise control is disabled. Separate clutch pedal switch codes are P0830–P0835.

## Common Symptoms
- Cruise control not working or not cancelling when declutching
- Jerks or rev hang when shifting
- Stop-start inactive
- Usually no check engine light

## Most Likely Root Causes
- Clutch switch faulty or misadjusted (does not switch or too late)
- Connector or wiring at the pedal box damaged or corroded
- Floor mat or pedal stop shifted, switch bracket broken
- Driving style (pulling away or shifting without fully depressing the clutch)

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around Clutch Switch.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement Clutch Switch.
5. Clear fault memory and run a verification cycle to confirm P0704 does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $16–$54 | $43–$130 |
| GBP | £13–£43 | £34–£103 |
| CAD | CA$22–CA$73 | CA$58–CA$174 |
| EUR | €15–€50 | €40–€120 |
| CHF | CHF 17–CHF 57 | CHF 53–CHF 158 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code P0704?
Avoid prolonged operation until inspected to prevent secondary component damage.

### How much does it cost to repair P0704?
DIY replacement parts average $16–$54, while professional service averages $43–$130.

### Will resetting P0704 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

