# OBD-II P045D: EGR B Control Circuit High

> **Quick Answer:** OBD-II fault code P045D indicates EGR B Control Circuit High. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $86–$756.

- **URL:** https://faultcodes.org/automotive/obd2-p045d
- **Category:** Automotive & OBD-II
- **Brand / Standard:** OBD-II
- **System Area:** EVAP Emissions Control
- **Severity:** High — Service Soon
- **Safe to Operate?:** No — Risk of Damage
- **DIY Difficulty:** Moderate (Intermediate)
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
Exhaust gas recirculation (EGR) routes part of the exhaust back into the intake to lower combustion temperature and NOx. EGR B is a second EGR valve next to valve A – on diesels with two EGR circuits the low-pressure valve, which takes exhaust after the particulate filter and feeds it in before the turbo compressor. GM's diesels of 2016–18 and FCA's 2.2-litre diesel in the Jeep Wrangler use it. P045D means the drive circuit of valve B is shorted to the supply, or the actuator draws overcurrent with the driver on (comparable to P0490 for valve A). The driver is switched off and EGR B stays inactive. GM lists this code among those that switch off the low-pressure EGR position control, but publishes no thresholds for it; the description follows the comparable valve A checks and CARB, which requires output circuits to be monitored.

## Common Symptoms
- Check engine light on
- Low-pressure EGR switched off, possibly higher NOx
- Usually no change in driving

## Most Likely Root Causes
- Control wire shorted to a supply wire
- Actuator motor shorted internally (overcurrent)
- Moisture or corrosion in the connector
- Engine module

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around Egr Valve B.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement Egr Valve B.
5. Clear fault memory and run a verification cycle to confirm P045D does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $30–$318 | $86–$756 |
| GBP | £24–£250 | £69–£602 |
| CAD | CA$41–CA$426 | CA$116–CA$1015 |
| EUR | €28–€294 | €80–€700 |
| CHF | CHF 32–CHF 338 | CHF 106–CHF 924 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code P045D?
Avoid prolonged operation until inspected to prevent secondary component damage.

### How much does it cost to repair P045D?
DIY replacement parts average $30–$318, while professional service averages $86–$756.

### Will resetting P045D fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

