# OBD-II P045B: EGR B Control Circuit Range/Performance

> **Quick Answer:** OBD-II fault code P045B indicates EGR B Control Circuit Range/Performance. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $108–$864.

- **URL:** https://faultcodes.org/automotive/obd2-p045b
- **Category:** Automotive & OBD-II
- **Brand / Standard:** OBD-II
- **System Area:** EVAP Emissions Control
- **Severity:** High — Service Soon
- **Safe to Operate?:** No — Risk of Damage
- **DIY Difficulty:** Moderate (Intermediate)
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
Exhaust gas recirculation (EGR) routes part of the exhaust back into the intake to lower combustion temperature and NOx. EGR B is a second EGR valve next to valve A – on diesels with two EGR circuits the low-pressure valve, which takes exhaust after the particulate filter and feeds it in before the turbo compressor. GM's diesels of 2016–18 and FCA's 2.2-litre diesel in the Jeep Wrangler use it. P045B means the drive circuit of valve B is electrically valid, but the feedback – current, voltage or position response – does not match the command. No manufacturer document available to us uses this code; the description follows the valve A counterpart P0404 and CARB, which requires output functions to be checked where feasible. Typical is a coked, stiff valve.

## Common Symptoms
- Check engine light on
- Low-pressure EGR switched off, possibly higher NOx
- Usually no change in driving

## Most Likely Root Causes
- Valve B coked or stiff
- Contact resistance in connector or wiring
- Actuator motor worn internally
- Engine module software or calibration

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around Egr Valve B.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement Egr Valve B.
5. Clear fault memory and run a verification cycle to confirm P045B does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $38–$363 | $108–$864 |
| GBP | £30–£286 | £86–£688 |
| CAD | CA$51–CA$487 | CA$145–CA$1160 |
| EUR | €35–€336 | €100–€800 |
| CHF | CHF 40–CHF 386 | CHF 132–CHF 1056 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code P045B?
Avoid prolonged operation until inspected to prevent secondary component damage.

### How much does it cost to repair P045B?
DIY replacement parts average $38–$363, while professional service averages $108–$864.

### Will resetting P045B fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

