# OBD-II P0005: Fuel Shutoff Valve A Control Circuit/Open

> **Quick Answer:** OBD-II fault code P0005 indicates Fuel Shutoff Valve A Control Circuit/Open. Usually safe for short trips if no severe drivability or safety warnings are active. Typical professional repair costs $54–$324.

- **URL:** https://faultcodes.org/automotive/obd2-p0005
- **Category:** Automotive & OBD-II
- **Brand / Standard:** OBD-II
- **System Area:** Powertrain & Engine Management
- **Severity:** Moderate — Plan Repair
- **Safe to Operate?:** Yes (Short Term)
- **DIY Difficulty:** Moderate (Intermediate)
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
The fuel shutoff valve is a solenoid valve that opens or blocks the fuel supply. On diesel engines it is usually closed without current, so that the engine stops reliably when switched off. The engine control module energises it to let fuel flow and monitors its control circuit continuously. P0005 is set when this control circuit is open. A normally closed valve then cannot open, so the engine does not start or cuts out while driving. Which vehicles use this valve and code varies by manufacturer.

## Common Symptoms
- Engine cranks but does not start
- Engine cuts out suddenly
- Check engine light on

## Most Likely Root Causes
- Wire or connector interrupted or corroded
- Valve coil open
- Fuse or relay in the valve supply faulty
- Output driver in the engine control module faulty

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around Fuel Shutoff Valve.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement Fuel Shutoff Valve.
5. Clear fault memory and run a verification cycle to confirm P0005 does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $19–$136 | $54–$324 |
| GBP | £15–£107 | £43–£258 |
| CAD | CA$26–CA$183 | CA$73–CA$435 |
| EUR | €18–€126 | €50–€300 |
| CHF | CHF 21–CHF 145 | CHF 66–CHF 396 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code P0005?
Usually safe for short trips if no severe drivability or safety warnings are active.

### How much does it cost to repair P0005?
DIY replacement parts average $19–$136, while professional service averages $54–$324.

### Will resetting P0005 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

